What Size Fittings Are on the Supply Lines of the Phoenix RV Kitchen Faucet Part # PF231461

Question

Question:

What size fitting on fresh water are they male or female

asked by: Rodney

0

Expert Reply:

There are two supply lines on the Phoenix Faucets 8" Single Handle RV Kitchen Faucet part # PF231461; one for cold water and one for hot water. Both the cold and hot water supply lines have a brass male 1/4"-14 NPSN fitting on them.

expert reply by: Conner L

0

Answer 1

I contacted Trimark in regards to a replacement part for the Trimark 030-0900. 030-0900 is actually a series number not a specific part number. To find the part number you will need to take the interior handle completely off the unit. On the back…

view full answer...

Answer 2

In regards to the Phoenix Faucets Hybrid RV Kitchen Faucet part #PF231441, there are three connections. The first connection is a black plastic, spring loaded quick connector fitting which attaches the pull out sprayer to the faucet to form a loop.…

view full answer...

Answer 3

We have a large selection of RV kitchen faucets available and the right one for your 1995 Lance truck camper is going to depend both on your existing setup along with your personal preference in terms of style and color. Just as an example I really…

view full answer...

Answer 4

RV makers like Keystone do not usually publish detailed specifications for the items like faucets that are used in fabrication of their trailers so I went to our warehouse and measured the threaded brass male fittings used in the Phoenix Faucets…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 7

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 8

The Solera Gas Strut part #LC280343 is designed for Lippert-Solera branded awnings. That said, it should be able to be used with others but you'd need to verify the dimensions in order to ensure compatibility. The length for this strut will be…

view full answer...

Answer 9

That is an excellent question and is asked more often than you think. Electric brakes like what come in the Electric Trailer Brake Kit #AKEBRK-2 can be submerged in water when you are loading/unloading your boat. Since water and electricity don't…

view full answer...

Answer 10

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Answer 11

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 12

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

What Size Fittings Are on the Supply Lines of the Phoenix RV Kitchen Faucet Part # PF231461

Product Page this Question was Asked From

Continue Researching