Hitch Lock Recommendation for 3 inch Trailer Hitch on Ford Super Duty

Question

Question:

Do you have a locking hitch pin for a 3inch receiver on a 2018 f350 diesel ?

asked by: Matt

0

Expert Reply:

For a hitch lock to fit a 3 inch trailer hitch on your Ford you would want the Draw-Tite Hitch Lock # 63260.

expert reply by: Jameson C

0

Answer 1

While the Thule T2 Pro XTR #TH83JV is compatible with motorhomes, it is not compatible with flat-towed vehicle applications. This is because the bike rack receives even more force and torque when mounted on the rear of a flat-towed vehicle. For a…

view full answer...

Answer 2

In order to be able to carry bikes between your towed vehicle and the RV you will first need a dual receiver for your trailer hitch. I recommend the Curt Dual 2 inch Receiver Tube Adapter, part #D-192. the bottom receiver is used for the tow bar and…

view full answer...

Answer 3

It sounds like you have been using the 2-inch Swagman Original bike rack #S64152-2 with a 1-1/4-inch to 2-inch hitch extender/adapter like #HTAD or #HT5R. Both of these adapters allow 2-inch accessories to be used in a 1-1/4-inch hitch. While these…

view full answer...

Answer 4

In order to use a hitch-mounted bike rack like the Swagman Original #S64152-2 that you were looking at while towing a vehicle, you will just need to add the Roadmaster Dual Hitch Receiver Adapter #RM-077-4. This adapter will slide into the 2 inch…

view full answer...

Answer 5

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 6

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Hitch Lock Recommendation for 3 inch Trailer Hitch on Ford Super Duty

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching