Troubleshooting S.H. and P.L. Codes on Draw-Tite I-Command Brake Controller
Question:
I have a 5535 draw tite brake controller for my 2012 GMC 1500. when I plug my trailer in, it will flash P.L. then S.H.. when I unplug the trailer the controller will flash c , n.c. and then it will flash P.L. and S.H. what is the P.L. and S.H. error codes mean? as they arent listed in the trouble shooting manual that came with brake controller.
asked by: Matt
Expert Reply:
I took a look at the instructions manual for your Draw-Tite I-Command Trailer Brake Controller # 5535. It looks like the "P.L." error code you are seeing indicates a power interruption while the brake pedal is depressed, and the "S.H." code appears when the brake wire sees a short during idle condition. There seems to be some kind of short or wiring issue with your brake controller.
I recommend starting by testing the controller itself to make sure it isn't bad. To do this, you will need to cut the blue wire several inches from the back of the brake controller. Then, using a circuit tester like # PTW2993, test end of the blue wire. It should only show power when you apply the manual override. If you get power at idle, then the controller itself is the issue and it will likely need to be replaced.
If the brake controller checks out okay, then reconnect the blue wire and make your way back to the trailer connector on your Sierra. Check the connector for any debris or corrosion that may have built up inside the pins, cleaning out as needed. You can then use your circuit tester to test the brake output pin on the connector, which again should only show power when activating the manual override on the controller. If you see power at any other point (or no power at all), then you will just need to trace along the wiring from the back of the 7-Way to the front of the truck for any damaged or exposed areas, fixing when needed.
If you are still unable to resolve the issue, please let me know and we can continue to troubleshoot.
Product Page this Question was Asked From
Continue Researching
- Shop: Brophy Camper Scissor Steps - 4 Steps - Aluminum - Non-Slip Tread - 24" Wide - 300 lbs
- Shop: Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle
- Shop: Suspension Enhancement
- Search Results: rv entry handle
- Search Results: rv steps
- Search Results: 57300
- Shop: Aluminum Hand Rail for 3 Step Scissor Stair
- Shop: Brake Controller
- Q&A: How Does Derale Radiator Fitting for Transmission Coolers Install on a 2002 Chevy S10 2.2 Liter
- Shop: Transmission Cooler
- Video: Derale Transmission Cooler Installation - 2009 GMC Yukon
- Video: Review of Derale Transmission Cooler Adapter Fittings for GM - D13018
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW
- Shop: Derale Universal Bendable Metal Mount Kit
- Shop: Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class IV - Efficient
- Shop: Flex-a-lite Transmission Cooler - Plate and Fin - 17 Row - Barbed Fitting
- Q&A: What Does it Mean When Draw-Tite Activator Brake Controller 5504 Displays Code SH
- Article: Troubleshooting Brake Controller Installations
- Q&A: Instruction Manual for Tekonsha Podigy P2 # 90885 Brake Controller
- Q&A: Troubleshooting Flashing PL Code on Trailer Brake Controller
- Q&A: Chart With Error Codes Explained for the Prodigy P2 90885
- Article: Trailer Wiring Diagrams
- Q&A: Troubleshooting Tekonsha Prodigy P2 Brake Controller that Doesnt Recognize Trailer
- Q&A: Replacing 6-Way on Trailer With 7-Way Connector
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Brake Controls
- Search Results: rv fireplaces
- Shop: Vehicle Tow Bar Brake System
- Article: Testing Trailer Brake Magnets for Proper Function
- Video: Roadmaster Stop Light Switch Kit Review RM-751200