What Are the Mounting Hole Dimensions of the Replacement Locking Paddle Handle # UWSLOCKING

Question

Question:

I am locking for a locking paddle type lock, but not for your toolbox. it is for motorcycle trailer.My question how can I find out what the size and bolt hole pattern dimetions are to make sure size is correct for existing bolt pattern. A manufature name brand would help if possibl thank you for your help

asked by: John C

0

Expert Reply:

I pulled a Replacement Locking Paddle Handle # UWSLOCKING from our warehouse to check out the size of the bolt holes and to see what the distance is between all of the mounting holes is.

I attached a picture that shows these measurements.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The Replacement Lock Cylinder for UWS Toolboxes #UWSLOCKCH507, which includes two matching keys, fits UWS tool boxes that have square paddle-style handles that look like part #UWSLOCKING. To get you the dimensions you need I went to our warehouse and…

view full answer...

Answer 2

Most trailer wheels have a zero offset. This is because a zero offset allows the wheel to handle the maximum load by distributing the the load equally to both sides of the wheel. To determine if your trailer wheels have an offset, you will want to…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

The amount of bow that's put into trailer axles like the #7359765 is based on about how much a trailer is typically going to weigh that has a 3,500 lb capacity. So there's a bit of approximation and obviously it can't be totally perfect…

view full answer...

Answer 9

While trailer axles do feature an upward bend like you are describing, there isn't a particular amount/measurement that is standard across the board. This bend in the axle is designed so that it will straighten under a trailer's loaded…

view full answer...

Answer 10

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 11

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 12

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

What Are the Mounting Hole Dimensions of the Replacement Locking Paddle Handle # UWSLOCKING

Product Page this Question was Asked From

Continue Researching