Recommended Valve Stem Extenders for 2018 Sunseeker 2800 on E-450 Chassis with 16 Inch Wheels
Question:
Hi, I have a new Sunseeker 2800 that came with valve stem extenders that do not wotk with my tireminder transmitters. I need something for the duallys on the E-450 cutaway that will. They are 16” steel wheels with Dicor hammer on wheel covers/simulators. Pic attached. The bracket on the WM8208 does not look like it will fit.
asked by: Howard
Expert Reply:
For your 2018 Sunseeker 2800 on E-450 Cutaway, I recommend the Wheel Masters Airless 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Wheel Cover Mount # WM8208. These will fit your 16 inch wheels and the wheel liners/covers. If you look at the attached installation details, you will see the extra bend specifically to fit the 16 inch wheels.
Product Page this Question was Asked From
Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Wheel Cover Mount
- Tire Inflator
- Inflation Kit
- 16 - 19-1/2 Inch Dual Tires
- Wheel Cover Mount
- Wheel Masters
more information >
Continue Researching
- Search Results: wheel masters
- Shop: Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Hub Mount - 135-Degree Bend
- Shop: Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Wheel Cover Mount
- Shop: TireMinder 4-Hose Inflation Kit - 16" to 19.5" Dually - Hub Mount
- Shop: Wheel Masters Tire Pressure Valve Extenders - 135-Degree Bend - Steel Rear Wheels - Qty 2
- Shop: Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Hub Mount
- Q&A: Can Wheel Masters 2-Hose Inflation Kit WM8007 Fit Sprinter RV
- Shop: Wheel Masters 2-Hose Inflation Kit - 16" to 19-1/2" Inner Dually - Hand Hole Mount
- Shop: Wheel Masters 2-Hose Inflation Kit - Up to 22" Inner Dually - Hub Mount
- Search Results: dually valve extension
- Video: Review of Wheel Masters Rubber Valve Stem Support Brackets - WM8029VS
- Q&A: Valve Stem Extenders for 2020 GMC Sierra 3500HD Dually
- Q&A: Install Video of Wheel Masters 4-Hose Inflation Kit WM8208
- Video: Wheel Masters 4 Hose Inflation Kit Installation
- Q&A: Can Wheel Masters 4-Hose Inflating Kits for Dually Wheels be Used with Rubber Valve Stems
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Shop: Trailer Hitch
- Search Results: 44649
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
- Video: Lippert Solera Slider Slide-Topper Review
- Search Results: 68149
- Shop: Trailer Wiring
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Shop: Fifth Wheel Hitch
- Video: Choosing the Right Brake Controller
- Search Results: 25580
- Article: Brake Controller Installation: Starting from Scratch
on Tire Inflator
