Which 7-Way Trailer Connector Fits a 2016 Chevrolet Traverse with the Factory Tow Package Connector
Question:
Hi, I have a 2016 Chevy traverse. It did not come from the factory with a tow hitch/ tow package. I purchased a hitch and 4 way plugwiring kit that plugged into a prewired factory plug above the exhaust pipe from you a year ago. Came with fuses to activate the tow package as well. It’s worked great over the last year. I just purchased a new trailer that has electric brakes and uses a 7way RV connector. After reading a little online, I ordered this universal kit to power brakes and lights: Part # ETBC7 I haven’t installed it yet, but came across other explanations that say something different and now I’m Confused. I do have the trailer brake control plug above the e-brake behind the dash I also purchaed a Hopkins brake controller and appropriate plug for the traverse . Do I need the wiring kit I listed and ordered above or would it be easier for me to just get a new 7 way plug to plug into factory port above exhaust and use the adapter plug behind the dash to plug a brake controller right into? I need lights and brakes. If I already have a plug and play option available, I’d prefer not to do a major wiring install if I don’t have to. On the other hand if thats what I have to do, I will do it Thanks!!
asked by: Jonathan
Expert Reply:
I looked up your previous order and you purchased the wiring harness, parrt # 118270. Since this plugged in and worked for you it means you have the factory to package connector without having the complete tow package. This is good news because all you need to add a 7-way trailer connector is part # 118271. This will give you a 7-way and replace your 4-way plugging into the same place.
So you don't need the # ETBC7 kit afterall.
Products Referenced in This Question
T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 7 Round - Blade
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Hanger Spacing for 3500 LB. Tandem Axle Trailer
- Q&A: Hanger Spacing When Using 23-1/8 Double-Eye Leaf Spring on Single Axle Trailer
- Article: How to Choose the Right Trailer Hitch Class
- Article: 2023 Best Gifts for Outdoor Enthusiasts
- Q&A: How Close Does Trailer Ball Height Need to be to the Height of the Trailer Coupler
- Q&A: Best Upgrade for Dometic 310 Part-Timer RV Toilet
- Article: Trailer Wiring Diagrams
- Q&A: Availability of Brake Line Fitting to go from 1/8 inch Male NPT to 3/16 Female FIF
- Q&A: Roof Rack and Cargo Basket Recommendation for 2015 Honda CR-V with Naked Roof
- Q&A: Brake Controller for 2019 Ford Edge With Factory Tow Package
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Anti-Rattle Devices
- Article: What Do I Need To Tow A Trailer?