Find a Replacement Key for a Sears Sport 20-SV Roof Top Luggage Box

Question

Question:

I dont see the lock that I have It is like a double lock, for my Sears Sport 20-SV Roof Top Luggage Carrier. How I know the specific key.

asked by: Pedro N

0

Expert Reply:

You can locate the replacement key for your Sears Sport 20-SV Roof Top Luggage carrier by looking at the face of the lock, and locating the for digit number stamped on the lock. Then, you'll search the key as part "THKEYXXXX", where "XXXX" is replaced by the lock's code.

For example, if your key is N248, you'll search for part # THKEYN2872

expert reply by: Jacob W

0

Answer 1

Thank you for providing the photo of your cargo carrier information. The Sears Cargo Carriers were manufactured by Thule and they offer replacement keys based on the reference number on the existing lock mechanism. If you can tell me the numbers…

view full answer...

Answer 2

For your Sportrack Skyline with a lock core that reads 2872 the correct replacement key you need is the part #THKEYN2872.

view full answer...

Answer 3

For your Lippert Components Power Stabilizer Trailer Jack #LC298707 the wiring is pretty simple. There are two wires that come out of the motor and they are both used as power or ground depending on the direction you want to turn the motor. To…

view full answer...

Answer 4

Your Thule Evolution 1600 6410 cargo box used the EasySnap Mounting Hardware Kit, which is now obsolete. Therefore, your best and closest option is to use the Replacement QM3 - Quick Mount Hardware #TH04997 to attach the box to your Malone AirFlow2…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 12

The Bargman 7-Way, RV-Style Connector #WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out. Wire colors will…

view full answer...

Find a Replacement Key for a Sears Sport 20-SV Roof Top Luggage Box

Product Page this Question was Asked From

Continue Researching