Can Tears on Extang Trifecta 2.0 Part 44450 be Repaired

Question

Question:

I have an extang 44450 trifecta cover.. i just noticed a tear in the cover in two spots. Is there a product to repair these two tears? about 2 inches long. Thanks.

asked by: James H

0

Expert Reply:

Although there are no kits available to repair the cover on your Extang Trifecta 2.0 # EX92450, I spoke with my contact at Extang who said that a local vinyl shop (they make boat covers) should be able to patch up some tears.

If you don't have a vinyl shop near you or you would rather just replace the tarp then the correct replacement tarp is part # EX92450-20 on our site.

expert reply by: Jon G

0

Answer 1

For the Extang Trifecta you have installed on your 2009 Toyota Tacoma 6 foot bed the correct replacement tarp would be #EX92915-20 and then for a hinge you'd need the part #EX1032.

view full answer...

Answer 2

We've checked with Extang in the past about install instructions or tips for the install of the replacement tarps for the Extang Trifecta like the part #EX92940-20 that you referenced and they have told us that first you want to let the cover…

view full answer...

Answer 3

It will be difficult to match up a replacement tarp for the Extang Trifecta tonneau cover on your 2015 Silverado 1500 6-1/4' bed without a serial number. If you have Extang Trifecta Signature 2.0 Soft Tonneau Cover - Folding CANVAS #EX94450…

view full answer...

Answer 4

There are two models of the Extang Trifecta tonneau cover for your 2008 Toyota Tacoma with 5 foot long bed. There is the Trifecta 2.0 #EX92905 which uses part #EX89VR as the replacement tarp; there is also the Trifecta Signature 2.0 #EX94905 which…

view full answer...

Answer 5

The replacement tarp for the Extang Trifecta 2.0 #EX92905 on your 2008 Toyota Tacoma can be found with part #EX89VR.

view full answer...

Answer 6

Thank you for providing the pictures. This helps me to confirm you will need the Replacement Tarp #EX92915-20 for the Extang Trifecta 2.0 Soft Tonneau Cover #EX92915 on your 2009 Toyota Tacoma.

view full answer...

Answer 7

What year is your truck? The tarp you referenced is a replacement for a short bed Dodge Ram between 2002 and 2008.

view full answer...

Answer 8

The Access Toolbox Edition Tonneau Cover, part #834532002443 is specifically designed to be used with a cross-over style truck bed toolbox that is 20 or 21 inches wide (measured from front to back.) As long as your toolbox is of compatible width,…

view full answer...

Answer 9

I reached out to my contact at Extang and the correct cover is the Replacement Tarp for Extang Classic Platinum Tonneau Cover-Black #EX6770 for your 2007 Ram 1500 Short Bed.

view full answer...

Answer 10

We have exactly what you need for your 2008 Dodge Ram with a 6-1/2 foot bed, the Replacement Extang Classic Platinum Tonneau Cover #EX6770. This is designed to be a replacement for Extang Classic Platinum Tonneau Covers on a 2002 - 2008 Dodge Ram…

view full answer...

Answer 11

The Replacement Tarp for Extang Trifecta 2.0 Soft Tonneau Cover EX92635-20 will install following the installation instructions of the #EX92635 you see attached. This is only a fit for the 1994 - 2010 Mazda B Series Pickup 7 Foot Bed and the 1983 -…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Can Tears on Extang Trifecta 2.0 Part 44450 be Repaired

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching