Width of the Valterra RV Sink Strainer # A01-2018VP

Question

Question:

Is this sink strainer 1-1/2 inches wide?

asked by: Phillip

0

Expert Reply:

The outside rim of the Valterra RV Sink Strainer # A01-2018VP is 1-11/16 inches so it is just under 1-3/4 inches wide. I've attached a photo to assist with some common measurement questions.

expert reply by: Jason S

0

click to enlarge

Answer 1

I recommend using either a 24x40 etrailer Cargo Carrier for RV Bumper #e99050 or 24x60 etrailer Cargo Carrier for RV Bumper #e99049 and moving the spare tire to either side of the bumper. You can see how the 40" wide carrier is installed with a…

view full answer...

Answer 2

For your MaxxFan roof vent you most likely need the Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents #MA10-20281K-1AF. This replaces the powered lift function. It is best to access this from the top like you see in…

view full answer...

Answer 3

We do have the correct replacement operator mechanism for your MaxxFan Plus model 4751KS, which is the following part: - Replacement Operator Mechanism #MA10-20281K-1AF Instructions are included along with the mechanism.

view full answer...

Answer 4

It definitely sounds like you need a replacement operator mechanism and lift arm for your MAXXAIR MaxxFan Deluxe #MA00-07000K. With that said, the #MA10-20281K-1AF and #MA10-20222KS will be the correct replacements for you. These will bolt right into…

view full answer...

Answer 5

We do have the exact parts you need and yes you can order it through us! I verified with the manufacturer for you that the correct parts for your MaxxAir 4801K are the following: - Replacement Operator Mechanism #MA10-20281K-1AF - Replacement Lift…

view full answer...

Answer 6

I've attached an exploded diagram photo of the vent assembly that uses the Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents #MA10-20281K-1AF for you to check out. You'll need to use it as a guide for…

view full answer...

Answer 7

From the numbers you provided it sounds like you have a MaxxFan 4700K model fan. The Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents #MA10-20281K-1AF is the correct replacement for the MaxxFan 4700K's.

view full answer...

Answer 8

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…

view full answer...

Width of the Valterra RV Sink Strainer # A01-2018VP

Product Page this Question was Asked From

Continue Researching