Will the Draw-Tite # 18159 7-Way Mounting Box work with the 4 Pole to 7 Pole and 4 Pole Adapter
Question:
Will the 4 mounting screws on the Hopkins 7 blade and 4 flat wiring kit model #37185 line up and work with the mounting holes on the Draw-Tite #18159 box? Thanks.
asked by: Kelly R
Expert Reply:
I went out to the warehouse and pulled the 6 and 7-Way Trailer Connector Mounting Box, # 18159, and the 4 Pole to 7 Pole and 4 Pole Adapter, # 37185, and test fit them to be sure, and the mounting holes line up perfectly.
You will need longer screws to go through the housing on the # 37185 adapter, and the sides of the adapter will hang over the edges of the # 18159 mounting box 1/8 inch on the two sides.
Products Referenced in This Question
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Product Page this Question was Asked From
6 and 7-Way Trailer Connector Mounting Box for Round or Square Tube Hitches
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 6 Round
- 7 Round
- Draw-Tite
more information >
Continue Researching
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Q&A: Will the Draw-Tite Trailer Hitch Fit a 2022 Volvo XC90 Recharge
- Article: How to Replace or Install an RV Roof Vent
- Q&A: How Do I Measure the Drop Distance on a Trailer Drop Axle?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Trailer Wiring Harness For 2025 Honda Pilot
- Q&A: Best 2024 Honda Passport Trailer Hitch and Wiring Setup
- Q&A: Recommended Hitch for a 2024 Honda Passport
- Article: Trailer Wiring Diagrams
- Q&A: 7-Way Wiring Harness And Trailer Brake Controller For A 2024 Honda Pilot Trailsport
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Difference in 2024 Mazda CX-90 Curt Trailer Wiring Harnesses
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller Installation: Starting from Scratch