Recommended 4-Way Flat Connector that Retains the Function of Factory 7-Way To Power Accessory
Question:
Thank you for the very quick answer, I appreciate it and this is why I always trust eTrailer so much. But unfortunately, for this time, it appears that your answer is incorrect because the factory Mopar 7-ways plug have a rectangle (almost square) connector on the body side of the plug. I attached a JPG of the factory Mopar part that is installed on most FCA vehicles, you’ll see (sorry for the angle) the rectangle connector behind the plug.
asked by: Simon C
Expert Reply:
Since you already have the factory 7-way, you only need the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C55384. This will install right behind your 7-way to give you the 4-way plug you need for your backup camera. This will retain the functionality of your 7-way as well.
Products Referenced in This Question
7-Way & 4-Way Replacement Connector for Dodge OEM Style Plugs
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How to Power Trailer Dome Light When Not Connected to Tow Vehicle
- Q&A: Options for Adding Interior Lighting to Enclosed Cargo Trailer
- Q&A: Recommended Dexter Suspension Kit 7753400
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Q&A: How Much Slack Is Needed In Trailer Wire Connection To The Tow Vehicle?
- Q&A: Troubleshooting 2017 Toyota Tacoma Sending Power Only to Trailer Right Side Tail Lights
- Q&A: Replacement Trailer Hub/Drum for Part Number 2420801
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Replacement Bearing and Seal Kit for 2004 Kendon Motorcycle Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
Simon C.
12/1/2017
Thank you for the very quick answer, I appreciate it and this is why I always trust eTrailer so much. But unfortunately, for this time, it appears that your answer is incorrect because the factory Mopar 7-ways plug have a rectangle (almost square) connector on the body side of the plug. I attached a JPG of the factory Mopar part that is installed on most FCA vehicles, you’ll see (sorry for the angle) the rectangle connector behind the plug.