What is Needed to Tow a Trailer With a 2008 Honda Odyssey?
Question:
I would like to equip my 2008 honda odyssey to tow a lightweight trailer. This is what is in my shopping cart so far: 75270 118438 ETBC7L 90250 D13503 What else do I need? Mount, Ball Mount? There are so many not sure which to choose.
asked by: Maria
Expert Reply:
So far you have Draw-Tite Hitch # 75270, a 4-way harness # 118438, brake controller install kit # ETBC7L, Curt Echo brake controller # C51180 and transmission cooler # D13503. This is a very good start in terms of what you need to tow with your 2008 Honda Odyssey. However, you were correct that you will need a ball mount, hitch ball and pin and clip.
If you are going to be towing, I recommend checking out Ball Mount Kit # 989900, which may fulfill your towing needs in one tidy package; two ball mounts - one with a 3/4” rise or 2” drop and the other with a 2-3/4” rise or 4” drop - a 1-7/8” hitch ball, a 2” hitch ball and a pin and clip. In order to choose the correct ball mount, you will need to take a couple quick measurements, and I've added a help article on ball mounts for you to take a look at which will explain this process, as well as a link to our page with each of our ball mounts that fit a 2" hitch.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 675 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Trailer Brake Controller
- Proportional Controller
- Hidden
- Up to 2 Axles
- Smartphone Display
- CURT
more information >
7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Mid-Size Truck
- SUV
- Van
- Standard Mount
- 11W x 8-3/4T x 7/8D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Frequently Asked Questions About Transmission Coolers
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Transmission Cooler
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Q&A: 2014 Jeep Grand Cherokee Compatibility with 5000 lb Travel Trailer
- Article: Determining Trailer Tongue Weight
- Q&A: What do the Class Ratings Mean on the Transmission Cooler Pages
- Article: Engine Oil Coolers
- Q&A: Transmission Cooler Recommendation for 2011 Chevy Silverado
- Q&A: SuperCoils and SumoSprings For Improving Ride Quality On a 2019 Ram 1500 With Truck Bed Camper
- Q&A: Towing Package for a 2008 Honda Odyssey
- Q&A: Comparing Flex-A-Lite And Derale Transmission Coolers For A 2016 Honda Pilot