Troubleshooting Pin Box Contact with Truck Bed Rails with Companion Hitch Adjusted to Highest
Question:
I have a B and W companion model 3000 and the top of the receiver seems like it sets to low in the truck bed. The king pin box makes contact with the sides of my truck when at a sharp turn and I have it mounted as high as the bolts will go. Help.
asked by: Mike W
Expert Reply:
Since you have your B&W Companion model 3000 like # BWRVK3500 up to its highest setting, the only thing you can do is adjust your pin box to account for the additional height needed. If it is already adjusted all the way down, then we can look at replacement options. To do this, we would need to know what your current pin box number is and that is normally printed on a sticker on your actual pin box.
Product Page this Question was Asked From
B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs
- Gooseneck and Fifth Wheel Adapters
- Adapts Truck
- Gooseneck Hitch to Fifth Wheel Trailer
- No Offset
- 20000 lbs GTW
- Connects to Gooseneck Hole
- Fixed Height
- Hitch Adapters
- B and W
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Location of the 40-Amp Fuse for the 2006 Chevrolet Silverado Tow Package
- Q&A: Fuse Location for Trailer Brake Controller on a 2005 Chevy Silverado
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: Options for Adding Interior Lighting to Enclosed Cargo Trailer
- Q&A: How to Power Trailer Dome Light When Not Connected to Tow Vehicle
- Q&A: Recommended Dexter Suspension Kit 7753400
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Mounting Hole Dimensions of Buyers Products 45 Ton Pintle Hook
- Q&A: Recommended Tire Size for Upgrading Tires From 7.00-15LT on My Horse Trailer
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Ram Trailer Tow Prep Package