Troubleshooting Lighting Issue With Curt T-Connector Installed On 2016 Dodge Journey
Question:
Just installed the Curt 56109 on my 2016 Dodge Journey. Followed directions to the t. All lights work on the vehicle until I plug the trailer in. The rear driver side light goes out and the trailer lights light up and then go dark. I unplug the trailer and the back light of the vehicle will not come back on until I turn off and then restart the vehicle. Brake lights work on both and signals work on both. Please help. What is the problem. Trailer lights are wired correctly. Works fine on other vehicles.
asked by: Tye
Expert Reply:
Let's start by making sure you have the correct harness. The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56109 is a confirmed fit for a 2016 Dodge Journey only if it has Incandescent tail lights. If you have LED tail lights, this harness will not fit. If you have LED tail lights, you will need the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56330 instead.
If you have the correct harness, then I would start will making sure your ground connection is bare metal to metal. It sounds like there is a power surge that is causing the system to protect itself and shut down until it can be reset or you may be overloading the harness if you have too many lights on your trailer.
Let me know if this doesn't solve the issue and we can continue to troubleshoot.
Products Referenced in This Question
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: 2011 Dodge Journey Driver Side LED Brake Light Not Working After Installing a Trailer Wiring Harness
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How to Tell if 2018 Dodge Journey Has LED or Incandescent Tail Lights
- Q&A: Ground Clearance After Installing Trailer Hitch on 2009 Dodge Journey
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Trailer Hitch and Bike Rack Recommendations for a 2020 Mercedes-Benz GLA
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: 2019 Dodge Journey Receiver Hitch and Wiring Recommendation
- Q&A: Parts Needed To Pull a Small Trailer With a 2018 Dodge Journey GT
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: Trailer Wiring Diagrams
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Hitch Installation Tips