Recommended Brake Controller and Wiring for 2009 Ford Ranger XLT 4x4
Question:
Hi, I have a 2009 Ford Ranger XLT 4x4 it has a 4 pin trailer plug now I need a brake controller and wiring . I tow a two axle trailer What do you suggest?
asked by: Tim
Expert Reply:
For the upgrade from a 4-way trailer connection to a 7-way with brake controller, I recommend the # ETBC7 for your 2009 Ford Ranger XLT 4x4. This Universal Brake controller wiring kit will allow you to use the current 4-way an then give you the wiring, circuit breakers, and connectors needed to upgrade your system. Then you just need to install a brake controller.
For a brake controller, I recommend the Tekonsha Prodigy P3 # 90195. This controller uses proportional braking, so it will apply the brakes on your trailer at the same time and with the same amount of pressure as you hit the brake pedal in your Ranger. It has an easy to read and understand LCD screen that takes code deciphering of errors out of the equation. It is simple, straight forward, and extremely reliable. It also has some presets to make connection to the trailer size that much easier.
I've attached a video of this installation to assist.
Products Referenced in This Question
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Product Page this Question was Asked From
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Picking Between ETBC7 and ETBC7L for Brake Controller Install
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Where Do the Wires on the Universal Install Kit for Trailer Brake Controllers Get Installed?
- Q&A: Suspension Enhancement Recommendation for 2019 Toyota RAV4
- Q&A: Replacement Lid and Lift Arm for Dometic 810263