How to Use a Hitch Mounted Cargo Carrier on a 2017 Honda CR-V
Question:
I have a 2017 Honda CRV. Ive never had a hitch /cargo carrier. I was thinking of getting something like the Curt 17x 46 carrier What parts do I need to install this?
asked by: David T
Helpful Expert Reply:
To use the Curt 17 x 46 carrier, part # C18145, you'll need a few things to get started.
First, you'll need to pick a Class III hitch. Without getting into too much detail, the hitch class determines the available capacity of the hitch. This is always limited by the weakest part of the system, so you'll want to verify your 2017 Honda CR-V's tongue weight and trailer weight limits with your owner's manual. I've included a link to a short article that shows the type of things that are generally towed or carried with each hitch class so you can get an idea of how these matter.
For a hitch, I recommend the Draw-Tite Class III, part # 76128. This provides ample weight and the correct receiver to use the Maxx Tow. Installation for both the AWD and FWD models is extremely similar. I've included a video of this process on a 2017 Honda CR-V and an article about installation tips so you can become familiar with the process.
After the hitch is installed, you install the cargo carrier by inserting the shank of the Curt Carrier into your trailer hitch receiver, and then insert the hitch pin to secure it to the vehicle.
Products Referenced in This Question
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Product Page this Question was Asked From
17x46 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 500 lbs
- Hitch Cargo Carrier
- Flat Carrier
- Fixed Carrier
- 20 Inch Wide
- Heavy Duty
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- 48 Inch Long
- Class I
- Class II
- Class III
- Class IV
- Steel
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: How to Determine Correct Rise or Drop for Blue Ox SwayPro Weight Distribution System
- Article: Trailer Maintenance Schedule
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement Leaf Spring Replacing Dexter 072-078-00 For 4,400 lb Axle
- Q&A: Does Primer Need to Be Applied to Aluminum Roof Before Applying Alpha Systems 4034 Roof Coating
- Q&A: How Can I Remove RV Roof Coating From The Side Of My RV?
- Q&A: What Hitch Do You Recommend for a 2024 Toyota RAV4?
- Q&A: Height of Timbren Rear Suspension Enhancement System # TGMRCK25D
- Article: Rooftop Cargo Carriers
- Article: How to Measure for Trailer Hitch Drop
- Article: Cargo Tie-Down Methods
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: My Trailer Hitch Doesn't Fit