Hub/Drum Recommendation for 18 ft EZ Dumper Trailer
Question:
I just had 1 more question before ordering. The ones that are on the trailer now have these ribs on the side like these. Does that matter? Thank you again for all your help.
asked by: Josh G
1
Helpful Expert Reply:
Your picture didn't make it through. But to pick out drums you'll need to get me the diameter of the spindle on your trailer or the numbers off of the bearings.
expert reply by:
Jameson C
1
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-K
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Progressive Dynamics 4100 Series RV Converter w/ Charge Wizard and AC/DC Distribution Panel - 35 Amp
- Shop: Progressive Dynamics 4000 Series Mini RV Converter w/ Charge Wizard and AC/DC Distribution Panel
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Search Results: al ko trailer brakes
- Search Results: akhd~545~35~k
- Article: Trailer Wiring Diagrams
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Video: etrailer Trailer Hub and Drum Assembly Installation AKHD-545-35-K
- Video: Best Trailer Brake Options
- Video: etrailer Hub And Drum Assembly Installation
- Video: Dexter Nev-R-Adjust Electric Trailer Brake Kit Installation
- Video: Review of Dexter Trailer Brakes - Electric Drum Brake Assemblies - DX32QR
- Video: Choosing the Right RV Battery
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Search Results: 10 inch drum
- Search Results: akubrk~35
- Search Results: 19~100
- Search Results: equalizers
- Search Results: trailer hubs and drums
- Q&A: Replacement Boat Trailer Seal for AD2527
- Q&A: What is the Proper Torque Range for Trailer Wheels
- Q&A: Info Needed to Pick Out Replacement Hub/Drum for Trailer Axle
- Q&A: Replacement Spindle, Bearings and Hub for 26-foot Prowler M26C Travel Trailer
- Q&A: Correct Replacement Hub and Spindle for Lippert 126003 Hub
- Shop: Brake Controller
- Q&A: How to Select the Correct Hub to Change Out a 4 on 9.44 Inch Bolt Circle Wheels with 5 on 4-1/2
Josh
8/29/2017
The outer bearing is L44649. I measured inside the hub and it was 10 inch x 2.25 inch. The bolt pattern is 5x4.5. Thank you for your help