Replacing Subaru Outback Factory Hitch with Draw-Tite 2-inch Class III Hitch Model 75673

Question

Question:

I am replacing the Subaru Outback factory Class I hitch with a DrawTite Class III hitch. My question is what to do about the crossbar of the factory installed Class I hitch, does it need to be replaced for stability reasons with a new bar can the hitch be cut off flush and the bar put back on? Can it simply be removed or is this bar needed? Not sure what would have been there if the car hadnt come with the Class I hitch pre-installed. Thanks!

asked by: Conrad

0

Expert Reply:

The Draw-Tite 2-inch Class III hitch model # 75673 will install in place of the factory 1-1/4-inch hitch without need to leave any part of the OEM hitch in place. The crosstube of the Draw-Tite will provide a similar reinforcement between the car's frame rails.

You can refer to the linked video, written instructions and help article for a complete picture of the install process, tools required and tips to facilitate the install.

expert reply by: Adam R

0

Answer 1

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area…

view full answer...

Answer 2

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 3

There should be 2 inches minimum between the tires on a dual axle trailer. This will allow the suspension components room to work properly but a little more room is ideal. For instance the Ultra-Fab Chock and Lock Wheel Stabilizers for Tandem-Axle…

view full answer...

Answer 4

Yes, you will need the Thule universal change key, #853-1251, to remove and install new lock cores. the change key pulls down all the tumblers so the lock can be removed or inserted. The existing lock, if present, will have to be unlocked for the…

view full answer...

Answer 5

That is an excellent question and is asked more often than you think. Electric brakes like what come in the Electric Trailer Brake Kit #AKEBRK-2 can be submerged in water when you are loading/unloading your boat. Since water and electricity don't…

view full answer...

Answer 6

For a standard replacement equalizer for your Dexter 13-122 equalizers you'd want the #TREQE1 or for a cushioned version you'd want the part #K71-653-00 which comes with new shackles and bolts. For a kit that includes new bolts, bushings, and…

view full answer...

Answer 7

If you look at the brackets of the TorkLift HiddenPower Under-Vehicle Battery Mount #TLA7727 you'll see that the top hook goes much wider than the bottom one. There wouldn't be a frame dimension that this will work with since trailer frames…

view full answer...

Answer 8

Yes, the EcoHitch part #306-X7384 that you referenced is available and a confirmed fit for your 2019 Subaru Legacy.

view full answer...

Answer 9

You are referring to the method that Subaru recommends for installing their hitch on your 2014 Subaru Outback Wagon. I can't recommend you install this #75673 hitch in any other way than how Hidden Hitch recommends, but there are customers who…

view full answer...

Answer 10

I have a great hitch receiver that I highly recommend.. It is the EcoHitch Hidden Trailer Hitch Receiver item #306-X7384. EcoHitch has the best hitch receivers for concealability and ground clearance. The Ecohitch has a 300 lbs tongue weight capacity…

view full answer...

Answer 11

Draw Tite hitches do not require the stabilizer strap like the Curt hitches do. The Draw Tite hitch part #75673 that you referenced would be an excellent option confirmed as a fit for your 2017 Subaru Outback that does not ever require a stabilizer…

view full answer...

Answer 12

There is just a bit of fascia trimming required on your 2019 Subaru Legacy in order to install the EcoHitch Hidden Trailer Hitch Receiver #306-X7384. What that means is you'll simply snip off part of the bumper fascia in order to give the…

view full answer...

Replacing Subaru Outback Factory Hitch with Draw-Tite 2-inch Class III Hitch Model 75673

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching