Tandem Axle 2 Inch Slipper Spring Suspension Kit with 13-1/8 Inch Long Equalizers
Question:
It looks like the APT6SE kit has everything I need to mount these axles on a different trailer. The old axles have a 13 1/8inch equalizer while the kit equalizer is only 12. Can you substitute a 13 1/8inch in the kit? Attached is a picture showing the axles with the equalizer showing on one of them. What is the best solution to get these mounted on a trailer? Thanks
asked by: Dave M
Helpful Expert Reply:
You will actually just need kit # APT6SE-36 which is the same thing only the equalizers in it are 13-1/8 inches long. The hardware with each is specific to the kits so some of the other parts are different but for 2 inch slipper springs and 13-1/8 inch equalizers kit # APT6SE-36 is the one for you.
![Michael H](https://images.etrailer.com/static/images/catg/people/324_tn.jpg)
Products Referenced in This Question
Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- Redline
more information >
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- etrailer
more information >
Continue Researching
- Shop: Gooseneck Hitch
- Search Results: 60692
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Shop: Vehicle Lights
- Shop: 60" Long Safety Chain with 1/4" S-Hook with Latch - 5,000 lbs - Qty 1
- Search Results: apt3
- Search Results: 60618
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - APT6SE Review
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
- Shop: Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole
- Search Results: safety chains
- Video: Titan Chain 60" Long Safety Chain with 7/16" S-Hook Review
- Shop: 60" Long Safety Chain with 7/16" S-Hook - 5,000 lbs - Qty 1
- Article: Slipper Spring Trailer Suspension System Review
- Shop: Curt Pop-In Ball for Factory Chevy/GM, Ford, and Nissan Underbed Gooseneck Hitches - 2-5/16"
- Search Results: hangers
- Q&A: What is the Hanger Spacing on the 6-Leaf Slipper Spring # e46SR?
- Q&A: Availability Of Replacement Spindle For 7000lb Dexter Trailer Axle Beam W/ 4" Drop 8327872
- Q&A: Replacement 4" Drop Spindle For Dexter 7,000LB E-Z Lube Trailer Axle
- Search Results: 2~5/16 " balls~14000 lbs
- Search Results: tja~2000~b
- Shop: Tire Chains
- Q&A: Hanger Kit and Slipper Spring Spacing for Tandem 7,000 lb Axles to Add 16 Inch Wheels
- Video: Dexter Bronze Bushings Installation
- Video: TruRyde Trailer Suspension - Leaf Spring Suspension - TREQ4541 Review
- Video: TruRyde Trailer Suspension TRFA71063 Review
- Video: Review of Dexter Trailer Leaf Spring Suspension - Standard Equalizer - HAP-205-03
- Video: Dexter Bronze Bushings Installation - 2019 CrossRoads Redwood Fifth Wheel
- Q&A: Spacing Between Hangers With Slipper Springs for 8,000 lb Axles and Hanger Kit