Parts Needed to Flat Tow 2016 Jeep Wrangler with 3/4 inch D-Ring Bumper
Question:
Im looking for a towbar for a Jeep with a d-ring mount. Would like telscoping arms and motorhome mounted. What do you recommend?
asked by: Anders K
Expert Reply:
For your 2016 Jeep Wrangler with 3/4 inch D-Ring bumper mounts the base plate kit you'd want would be the part # RM-035.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Products Referenced in This Question
Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- Recurring Set-Up
- Portable System
- Power Assist Brake Compatible
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Blue Ox
more information >
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates - Crossbar
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Standard
- Roadmaster
more information >
RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs
- Safety Cables
- Coiled Cables
- 68 Inch Long
- 6000 lbs GTW
- Snap Hooks
- Coated Cables
- Roadmaster
more information >
Product Page this Question was Asked From
Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 3/4" Thick
- Base Plates
- Aftermarket Bumper Adapters
- Hitch Pin Attachment
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Article: Trailer Wiring Diagrams
- Article: Pintle-Hitches
- Q&A: Replacement Conversion Kit For Motor For # 781005
- Q&A: Tow Bar To Attach To Warn Elite Bumper On A 2014 Jeep Wrangler
- Q&A: Does The etrailer Invisible Base Plate Kit # e86YR Need An Adapter For A Blue Ox Aventa II Tow Bar
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Flat Towing Package for 2018 Jeep Wrangler JL and JL Unlimited
- Article: Brake Controller Installation: Starting from Scratch
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: Flat Towing Package for 1998-2006 Jeep Wrangler
- Q&A: Can a Jeep Wrangler be Flat Towed by the Front Bumper
- Q&A: Recommended Replacement AC Unit For A Coleman Mach On A 2000 Mesa Pop Up Camper
- Q&A: Clevis Inner Diameter for the Demco Tow Bar Adapter for Blue Ox Base Plates