Replacement Bearings, Races and Seal for 1993 Coleman Destiny Pop Up Camper
Question:
Hi, my son in law has totally botched a wheel bearing job on a 1993 coleman destiny pop up trailer other wise i would just use the part nos. from those parts but i do not trust that they are correct so here i am asking for your help please. The factory nos. out of the parts manual are the following, grease seal#4714a2201,bearing and race pkg.#4716-1101. I will be doing both wheels so need parts for both. thank you so much, looking forward to doing business. hope you can find these bearings and related parts.
asked by: Rick R
Expert Reply:
I was able to locate the correct bearings, races and seal that correspond to the part numbers you provided in your question.
For bearings you will need the part # L44649 and for races you will want # L44610. Then for the grease seal you will use part # 13194.
You can also take a few quick measurements on the trailer spindle at various locations to verify that these are the correct replacement parts. I have attached an image that shows where these measurements should be taken. You are basically measuring the diameter of the spindle where the bearings sit to determine the inner diameter that is needed. I recommend using a digital caliper like # PTW80157, as the measurements will need to be exact.
I have also attached a couple of articles on trailer bearings and wheels that you might find helpful.
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.4 Inch I.D.
- 1.983 Inch O.D.
- Redline
more information >
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Grease Seal
- Shop: Replacement Trailer Hub Bearing - L44649
- Search Results: 13194
- Search Results: l44610
- Shop: Replacement Race for L44643 and L44649 Bearings
- Shop: Brake Controller
- Q&A: Recommended Trailer Brake Controller for a 2019 Toyota Tacoma
- Q&A: Availability of Wheel Bearing Kit for Coleman Destiny Rio Grande Popup Camper
- Q&A: Picking Out Grease Seal for 2000 Coleman Taos Pop Up
- Shop: Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob
- Shop: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
- Shop: Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Q&A: How Tight Should Castle Nut be on Trailer Hub
- Q&A: Replacement Bearing Kit Recommendation for a Coleman Fleetwood Santa Fe 1999 8-258 Hub
- Q&A: Replacement Regulator For 1998 Coleman Bayside Pop Up
- Q&A: How to Pick out New Tires for a 1998 Coleman Pop Up Camper
- Search Results: 5 x 5.5 hub
- Search Results: spindle grease seal
- Search Results: l44649
- Article: Most Popular Wheel Bearings
- Video: Redline Trailer Bearings Races Seals Caps - Seals - 13194 Review
- Search Results: 13194tb seal
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-EZ-2K Review
- Search Results: 1.98 grease seal
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Trailer Wiring
- Video: Camco Propane - Regulators - CAM59333 Review
- Video: etrailer Trailer Idler Hub Assembly Installation
- Video: TruRyde Trailer Bearings and Races Kit Installation