Running Lights Work But No Tail Lights Working
Question:
Replacing tail lights with new submersible lights. Have red connector sensor lights on the connection coming from my truck. They light up as if the connection is pure. Side running lights work. Not the new tail lights. Decided to hook up the old to check. Now they dont work. Sensor light is still saying there is proper connection
asked by: Marc
Expert Reply:
This sounds like a ground issue. Ground problems normally show up when there is more draw on a system such as when you have the running lights on and then use another function like a turn signal or brake light but can show up any time.
Make sure that the vehicle side and trailer side connectors are clean and free of corrosion inside and out. The main connector grounds should be attached to clean and corrosion free bare metal surfaces.
The light grounds should also be attached to clean and corrosion free bare metal surfaces. If there is anything between a light ground and the metal trailer frame or if the trailer has an aluminum frame, tilt bed, or folding tongue, any of these things can interrupt the ground. Running jumper wires from the light grounds to the main trailer connector ground can help.
If none of the above steps allow you to solve the problem, please let me know and I would be glad to offer further assistance.
Product Page this Question was Asked From
Continue Researching
- Shop: Trailer Wiring
- Video: Pollak Fifth Wheel and Gooseneck Wiring Harness Installation - 2021 Ram 2500
- Shop: Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole - Ford, GM, Dodge, Nissan w/ Factory Plug
- Shop: Prest-O-Fit 4-Piece Step Rug Set for MORryde StepAbove RV Steps - 19-1/2" Wide - Brown
- Video: Furrion Vision S LED Marker Light RV Side Cameras Review
- Video: Furrion Vision S LED Marker Light RV Side Cameras Installation - 2022 Jayco Eagle HT Fifth Wheel
- Video: Review of Furrion RV Camera System - Wireless Camera with Monitor - FOS05TASF
- Video: Review of Furrion RV Side Marker Light and Camera System - FCE48TASL
- Video: Furrion Vision S Wireless RV Backup Camera Review
- Shop: Replacement 5" Monitor for Furrion Vision S Wireless RV Camera System
- Shop: 12V PWM Filter for RV Backup Camera Systems - Hardwire
- Shop: Replacement Shark Fin Camera Mounting Bracket for Furrion Vision S RV Camera Systems - Black - Qty 1
- Shop: LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2
- Shop: Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen
- Shop: RV Camera
- Search Results: furrion backup camera
- Search Results: 50 amp male plug
- Q&A: How Much Does the Reese Goose Box # RP94716 Weigh
- Q&A: Will NOCO Battery Charger Charge Battery Without Damaging It?
- Video: Review of Reese Gooseneck and Fifth Wheel Adapters - Goose Box 5W To Gooseneck Air Ride - RP85FR
- Search Results: pollack 7 pin
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: rail kit
- Q&A: Working Running Lights, But No Turn Signals or Brake Lights On Trailer
- Q&A: Trailer Marker Lights are Not Working But All Other Lights Work
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: 44649
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)