Proper Tire Pressure for Trailer Tires
Question:
I have a 2002 Coleman Niagara Elite with weighs in around 3200 lbs pretty much the maximum for these tires It seems to track better with tire pressures around 50 PSI. The sidewall states the maximum of 65 PSI - but no recommended pressure. When I increase the pressure to 60 PSI it is all over the place. Is it okay to run the tires at 50 PSI? What does the manufacturer recommend for PSI? Thanks,
asked by: Jesse G
Expert Reply:
You should not run your tires at 50 psi if their max rating is 65 psi. Trailer tires such as the Karrier # AM31991 always need to be filled to the max psi for the best performance, while reducing the air pressure is going to lessen the load you are able to carry, making the tire's performance uneven and heightening the risk of a blowout.
![Kyle S](https://images.etrailer.com/static/images/catg/people/1237_tn.jpg)
Product Page this Question was Asked From
Karrier ST175/80R13 Radial Trailer Tire w/ 13" White Mini Mod Wheel - 5 on 4-1/2 - Load Range D
- Trailer Tires and Wheels
- Tire with Wheel
- Radial Tire
- Load Range D
- 175/80-13
- 13 Inch
- M - 81 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Video: CE Smith Trailer Fenders - Top and Side Step - CE19503-2 Review
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-EZ-K Review
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-K Review
- Video: CE Smith Trailer Suspension CE20023G Review
- Q&A: Bearing Buddy Spindle Seal Kit For Hub Using L68149 Inner Bearing
- Q&A: Recommended Hand Winch for 2200 lb Boat
- Q&A: Should Trailer Suspension Shackle Bolts Be Torqued
- Search Results: trailer leaf spring bushings
- Search Results: nylon bushings
- Search Results: leaf spring clamp
- Search Results: leaf spring clamps
- Search Results: spring bushings
- Search Results: trailer lug nuts
- Search Results: #84 spindle
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Q&A: How to Pick Out New Hub for Trailer With Bearing Numbers that Aren't Marked
- Q&A: Recommended Trailer Idler Hub for a Trailer with 84 Spindles
- Shop: TowSmart Trailer Winch - Single Speed - Ratcheting - 20' Strap - 1,500 lbs
- Shop: U-Bolt Plate for 2" Diameter Axle, 1-3/4" Wide Spring - 1/2" Bolts - Galvanized
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
- Shop: Trailer Wiring