EcoHitch Fit Recommendation for 2015 Subaru Outback

Question

Question:

Is this the appropriate hitch for a 2015 Sub Outback? I note that there is reference that no need to cut bumper cover for 2017. Do you have to cut for the 2015? Thanks

asked by: Kerry L

0

Expert Reply:

For your 2015 Subaru Outback Wagon the EcoHitch part # 306-X7601 is a confirmed fit. You will need to trim the rear fascia to install the hitch as well.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 4

The Curt #C13410 and Draw-tite #76227 are very similar in design and both have the same weight ratings of 600lbs tongue weight and 4,000lbs of trailer weight. I do like that Draw-Tite does add the additional plate of steel in between the hangers that…

view full answer...

Answer 5

Hey Parrish, There was a design change in the Draw-Tite Max-Frame Trailer Hitch Receiver #76227 so it unfortunately only comes with one hitch pin hole now and there unfortunately are no other compatible hitches available with a second hole for a…

view full answer...

Answer 6

There are really two main types of trailer hitches for a 2019 Subaru Outback, visible like the etrailer Trailer Hitch Receiver part #e98847 and hidden like the etrailer Trailer Hitch Receiver part #e42TR. The visible hitch means you can see the cross…

view full answer...

Answer 7

The information I have says the #306-X7162 has a ground clearance measurement of 10-1/2". The Curt #C13410 has approximately 12" to 12-1/2" of clearance when measured to the bottom of the receiver. I'm not 100% sure how accurate…

view full answer...

Answer 8

The foam panel is in the bumper to help support the bumper panel as well as provide a cushion for the cover if there is a minor collision. Without the cushion the cover will tend to break or crack easier as it does not have the support needed. I have…

view full answer...

Answer 9

Thanks for the nice words, and on a scale of 1-10, the installation difficulty on your 2019 Subaru Outback is rated a 10 for the etrailer Trailer Hitch Receiver #e42TR. This is somewhat subjective, of course, and we have it as a higher rating…

view full answer...

EcoHitch Fit Recommendation for 2015 Subaru Outback

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching