Which 5 Bolt Hub Assembly is Recommended for Use with the Redline Spindle # TRU94FR
Question:
What hub assemblies should I order to use with TRU94FR shaft? I need a 5 bolt pattern.
asked by: Duane
Expert Reply:
On the TruRyde Spindle, part # TRU94FR, the hub assembly you would need is an idler hub assembly. An idler hub assembly does not have an integrated brake drum. It will also depend on what size wheel and tire you will be using.
If you need an idler hub assembly with a 5 bolt pattern you can use the Dexter hub # 34822545BX. This is a idler hub assembly with a 5 on 4-1/2 inch bolt pattern that will work on 2000lb axles. It will only work with 8 inch to 10 inch wheels.
If you need an idler hub assembly for a larger 12 inch to 15 inch wheel, you can use the Dexter hub # 8-258BTUC1. This assembly also has a 5 on 4-1/2 inch bolt pattern and will also work on 2000lb axles.
Both of these hub assemblies will include the lug nuts, bearings, races, seal and cap.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Recommended Spindle And Hub Assemblies For 1-1/2 Inch Square 2,000-Lb Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Proper Replacement for Reliable ACT-7.5K Brake Actuator
- Article: How to Measure a Trailer Axle
- Article: Trailer Wiring Diagrams
- Q&A: Can I Use Dexter Components on Lippert Axles and Vice Versa?
- Q&A: What Does BTR and BT8 Mean when Picking Out Replacement Trailer Hub
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Stabilizer Jack Recommendation for 4 Corners of Hi-Lo Travel Trailer
- Article: How to Mount a Truck Bed Camper
- Article: Trailer Tire Sizing
- Article: How to Accurately Measure Trailer Leaf Springs