2005 Fleetwood Flair Sway Bar Recommendation

Question

Question:

What are the recommended sway bars for 2005 Fleetwood Flair? Will this help improve stability?

asked by: Carlo C

0

Expert Reply:

Your 2005 Fleetwood Flair is built on the very popular Ford F-53 chassis.

Sway bars do help this chassis tremendously. The rear bar making the biggest improvement. For that you would want the part # RM-1139-143 which is a confirmed fit.

Then for the front part # RM-1139-148 which will also make a noticeable improvement.

expert reply by: Jameson C

0

Answer 1

The flack plate/bracket should indeed have the bushings facing towards the front of the vehicle. I included an image showing this as well. As to drilling the holes for the shackle bracket, I don't really have a way to make that easier,…

view full answer...

Answer 2

We have rear sway bars that are a fit for your 2017 Ford F-53 chassis but you cannot use the front bar you have on the rear. If your RV is less than 34 feet long you would want the part #RM-1139-143 or if longer than that part #1139-144. Typically a…

view full answer...

Answer 3

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 4

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 5

A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will need…

view full answer...

Answer 6

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

2005 Fleetwood Flair Sway Bar Recommendation

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching