Trailer Brake Controller Port Location and Wire Functions on a 2007 GMC Sierra Classic
Question:
I have a 2007 1500HD Classic Body and Im trying to get the wiring diagram to wire the Tekonsha Voyager to the factory harness. Thanks
asked by: Tony B
Expert Reply:
If your 2007 GMC Sierra Classic 1500HD came with a factory installed 7-Way trailer connector, all you will need to do is to plug the # 3015-P wiring harness into the factory port on the truck. This port is located in an electrical junction box under the dash and to the left of the brake pedal. Remove the cover and plug in 3015-P into the open port on the top row, second from the left. I have included an FAQ article that should help.
If the truck did not come with a factory 7-Way, you will still plug in the brake controller wiring harness as described above. To add a 7-Way, you will use part # 30955. I have included a link to a video that shows a typical installation for you to view.
The functions of the wires on the brake controller and harness are:
White = ground
Black = 12 volt power
Blue = Brake output
Red = stop light
Products Referenced in This Question
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - GM
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Replacement Custom Multi-Tow 7-Way and 4-Way Trailer Connectors
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Product Page this Question was Asked From
Tekonsha Voyager Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Manual Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- Indicator Lights
- Up to 90 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - GM
- Article: Brake Controller Installation for 2007 (New Body Style) - 2013 GMC Sierra and Chevy Silverado
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Shop: Vehicle Sway Bars
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Shop: Tailgate
- Shop: Vehicle Air Mattress
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Q&A: Can Factory Brake Controller of 2007 GMC Sierra 2500HD be Bypassed without Dash Codes
- Shop: Hellwig Adjustable Big Wig Rear Anti-Sway Bar - 1-5/16" Diameter
- Shop: Pollak 7-Pole, RV-Style Trailer Connector Socket w/ Wiring Harness and Mounting Bracket
- Shop: Timbren Rear Suspension Enhancement System
- Shop: Replacement Custom Multi-Tow 7-Way and 4-Way Trailer Connectors
- Article: Brake Controller Installation: Starting from Scratch
- Video: Choosing the Right Brake Controller
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Search Results: 44649
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Search Results: 68149
- Search Results: 25580
- Q&A: Replacement Trailer Grease Seals for Allis 5013 29772
- Search Results: dust cap