Troubleshooting Trailer Running Lights working but no Stop Lights or Turn Signals
Question:
How can I improve ground on trailer lights, they are basic issue, and what else could the problem be? thanks
asked by: Kevan V
Expert Reply:
When some lights work but others don't, you are correct that an issue with your ground is the likely culprit. Start with the trailer connector on the vehicle and make sure the ground wire coming out of it is connected to clean metal, meaning no dirt, no paint, no rust or corrosion of any kind.
Follow that by moving to the trailer connector and the ensure the ground wire is in an equally solid state, connected to a bare metal surface without dirt, paint or corrosion. With the taillights needing their own ground, you likely have it from the bolts on the light assembly. If so, just be sure the light's housing is attached to the frame of the trailer.
As for what else it might be, you may want to use a circuit tester like # PTW2993 on the vehicle side to test the functions in order to make sure you have everything wired correctly and there are no loose wires. You would need to use an alternate 12V power source to do the same with your trailer. Also check your connectors for corrosion, which can cause issues like yours; for the most part the corrosion can be cleaned off.
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Article: Troubleshooting Brake Controller Installations
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Checking Trailer Lights Without Hooking Up to Vehicle?
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working