Recommended Hitch and Roof Rack For a 2016 Ford Focus S Hatchback

Question

Question:

I a purchasing a 2016 Ford Focus S hatchback. I already own a Thule bike rack for a 1-1/4-inch hitch. Which is the BEST hitch to put on this car? Also, I have a Thule roof mount system from our 2008 Audi A4 Avant. Can this be adapted to the Focus hatch back?

asked by: Brad H

0

Expert Reply:

The best option for your 2016 Ford Focus hatchback is going to be the Curt # C11158. Along with the quality of this 1-1/4 inch Class I hitch, it is a custom-fit for your vehicle and has the edge over the Curt hitch because it will not require you to use stabilizer straps with your bike rack like the Curt does. I've added a link to a video review of this product for you to check out.

As for your Thule roof mount system, there are none available which can be used on both a 2008 Audi A4 and a 2016 Ford Focus Hatchback (. If you need a new rack and are interested in sticking with Thule I recommend going with the Thule WingBar, which consists of:

- Thule WingBar Evo Crossbars # TH711420 (Black) OR # TH711400 (Silver)
- Evo Clamp Feet for Thule Crossbars # TH710501
- Fit Kit for Thule Evo Clamp Roof Rack Feet # TH145125 OR # TH145089 (Focus RS hatchbacks)

This roof rack is the best option for your Focus because it is highly functional with the ability to carry a multitude of accessories like bike racks or roof boxes; it is also durable, very quiet and easy to use. I've added some links to video reviews of the WingBars for you to check out as well.

expert reply by: Kyle S

0

Answer 1

To install a cargo basket on the roof for your 2017 Ford Focus the only option is by first installing a roof rack like the Thule Square bar rack #TH712400, #TH710501, and #TH145089 that fits your vehicle. There are Safari baskets like the one you…

view full answer...

Answer 2

For pop up campers like the 2017 Rockwood Freedom 1640ltd that you have the SportRack roof rack part number #SR1020 that you referenced is just what you need. It will fit the roof of the camper and then give you the ability to carry a few bike racks.…

view full answer...

Answer 3

I confirmed with Thule that the Evo Clamp Feet for Thule Crossbars #TH710501 is made specifically to be sold/shipped in the United States from Thule. The Evo Clamp Feet for Thule Crossbars #710500 is made to be sold/shipped in Europe. Thule also…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 10

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Recommended Hitch and Roof Rack For a 2016 Ford Focus S Hatchback

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching