How To Select The Right Awning Size For Slideout

Question

Question:

I want to buy awnings for my sliders. Should I be using the exact roof measurements or the end to end measurements on the slder flange sealsblack Thanks

asked by: John

0

Expert Reply:

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width.

For example, the Black Solera Slider # LCV000165061 is 156 inches wide and is designed to fit a box that measures 146 to 151-3/4 inches.

I have attached a link to the awnings we offer. If you want to send me the measurement of your box or boxes and what color you want I can make some recommendations that will work for you.

expert reply by: Jeffrey L

0

Scott H.

7/23/2020

Hello,I just looked at the E trailer info you had online .I have an Artic Wolf 285DRL4 5th wheel .I have 3 slide outs and want to add the toppers.I have a question on how to size correctly and would like reccommendations. The sizes from flange to flange are 148" ,121 1/2",and 84". With color scheme i believeblack would be the color. Thanks

Reply

Chris R.

7/28/2020

I can help! For your three slide-outs (starting with the largest) you will want the Solera # LCV000165061, # LCV000182037, and # LCV000165062.

Reply

Kris B.

7/4/2020

We have a 2013 32sab cougar elite. We do not currently have slide toppers. Flange to flange measurements are 59.5 inches, 81 inches, and 149.5 inches. What toopers with mounting hardware do you recommend for us?

Reply

Chris R.

7/7/2020

For your three slide-outs you will want the Solera # LCV000168104 (Black) or # LCV000163273, the Solera # LCV000165062 (Black) or # LCV000163287 (White), and the Solera # LCV000165061 (Black). All kits include the needed mounting hardware.

Reply

Richard S.

7/1/2020

looking for cost of slide topper that is 268 by 46 inches. fits on a sunseeker class c 3050s with full length side slide

Reply

Chris R.

7/7/2020

Does your slide-out measure 268" wide? If so, we don't have any toppers quite that large. If that measurement is referring to something else just let me know.

Reply

Dale E.

5/29/2020

I have exactly 3" from the top of my slide to install the rail for a slide topper awning. Will this work? Can you recommend a awning that will work for a slide that is 112 3/4" flange to flange?

Reply

Chris R.

6/2/2020

At minimum there needs to be 3" of clearance between the top of your slide-out and any existing components like a bracket or gutter for the Solera Slide-Toppers to install and operate. As long as you truly have 3" of space, it will work. For a 112-3/4" flange to flange measurement you'll want the Solera Solide-Topper Black # LCV000251461 or White # LCV000163292.

Reply

Mike S.

5/26/2020

Trying to find a slide topper for my Rockwood mini light. From flange to flange is 80 1/2 inches.

Reply

Chris R.

5/29/2020

For you're 80-1/2" flange to flange measurements you'll need the Solera Slide-Out Awning # LCV000163287.

Reply

Randy K.

4/10/2020

I have solera brackets on my camper and would like to order toppers for my slide outs I have 4 slides and want to make sure I order the right ones and I also need name of who to order from. My measurements are. The out side of slide 153”144”84”84” Thank you in advance

Reply

Chris R.

4/13/2020

Going from largest to smallest on your camper, you'll need the Solera Topper # LCV000168109 (Black) or # LCV000163300 (White), # LCV000177334 (Black) or # LCV000163298 (White), and # LCV000165062 (Black) or # LCV000163287 (White).

Reply

Doug

1/18/2020

I would like to buy a Solera slide topper. My slide, including the flanges trim on the box is 97 1/2. The box without the flat trim is 92. It sounds like the 8 foot 7 slide topper would be the correct one? The 8 foot, 1 wouldnt have any overhang. Is my thinking correct?

Reply

Jason S.

1/20/2020

For your slide topper, you will definitely want the overhang to keep water and debris out. We determine the correct size but measuring the slide including the flanges so you will want to go with the 97-1/2 inch measurement you gave. All that to say you are correct...you will want # LCV000168108 for a black topper or # LCV000163290 for a white topper.

Helpful Links

tv-review-lippert-solera-slider-rv-awning-lcv000165062.aspx

Reply

Show All (12) Replies

Hide Replies

Answer 1

Measuring to pick out the correct slide topper for an RV like your 2018 Forest River Rockwood is pretty easy. You have to measure the box width including the flange on it and you'll be set. So the Solera part #LCV000163288 that you referenced…

view full answer...

Answer 2

It would be a little tight but the Camco AC Cover part #CAM45392 is close enough to the dimensions of your Furrion Chill RV AC unit that it would fit and work great.

view full answer...

Answer 3

I was able to find the service manual for the Lippert Ground Control 3.0 #LC358590 and found in that where Lippert recommends if the jacks are down for extended periods, it is recommended to spray exposed leveling jack tubes with lubricant every 3…

view full answer...

Answer 4

Yes, the Solera RV Slide-Out Awnings like part #LCV000163287 which fits 80" - 85" wide slide-outs (flange to flange) will require that you remove the drip rail. However, the Solera RV Slide-Out Awning will take the place of the drip rail in…

view full answer...

Answer 5

The RV Shower Panel #WAY72YR definitely looks a lot more complicated than it needs to, when it's actually super simple to install. You'll just remove the old faucet and handles and connect the hot and cold hoses to your pipes. You can then…

view full answer...

Answer 6

First it is important to verify the measurement point on your 2022 Jayco Eagle HT 24RE. If your 145" measurement is the widest point and includes the flange on both sides then you will want the Solera RV Slide-Out Awning in White #LCV000163298…

view full answer...

Answer 7

The Solera 14' Slider (Slide-Topper) in White w/ White Hardware #LCV000163301 comes with everything you need for installation except the #CAM25013 which is an 8 foot length that is shown in the video as you stated. I do recommend getting two of…

view full answer...

Answer 8

Thank you for that measurement info, and we do have the correct awning for your trailer with an 82-1/2 inch flange-to-flange measurement. You can choose from either black or white in color, with the correct fits being the two listed below: - Black:…

view full answer...

Answer 9

There is a way to find an awning for your 2018 Coachmen Clipper 106, though we do not have any specific parts for years, makes and models of trailers. To find the correct awning you need to select the fabric size that will extend at least 2-1/2"…

view full answer...

Answer 10

For a flange to flange measurement of 83-1/2 inches the correct Solera slide out awnings would be the part #LCV000165062 for black or part #LCV000163287 for white.

view full answer...

Answer 11

Yes, you can add a Solera RV Slide-Out Awning such as the, #LCV000163287 to your 2012 Keystone Cougar 5th wheel RV. For determining the proper size Solera Slider you need, measure the total width of your slide room from the outside including the…

view full answer...

Answer 12

For your 5th-Wheel Trailer, I recommend using the Solera 7.5 Foot Slider (Slide-Topper) in Black with Black Hardware #LCV000165062 or White with White Hardware #LCV000163287. This slider is 90 inches wide and has a box width range of 80 inches to…

view full answer...

How To Select The Right Awning Size For Slideout

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching