Instructions Link for Bike Add On for RockyMounts SplitRail 3 Bike Tray Style Rack

Question

Question:

I cant seem to find any videos or clear photos demonstrating how to remove the Front bike position, if you only need to carry 2 bikes. Are tools required similar to Yakima 3 bike platform carrier? If so, how many bolts need to be removed and where are they positioned? Thanks!

asked by: Professor P

1

Helpful Expert Reply:

If you check out the install link down below (probably the second one listed), you'll see specific instructions for just the add-on portion of the RockyMounts SplitRail 3 Bike Tray Style Rack # RKY11404-3 that you referenced.

There are tools involved in the process.

expert reply by: Jameson C

1

Answer 1

A great style of bike rack for front hitches is the platform style. This will increase visibility when driving. A great bike rack for this is the Thule T2 Classic 2 Bike Platform Rack #TH9045, its is a great fit with your trailer hitch #65003. Most…

view full answer...

Answer 2

As long as you have a 2 inch hitch on your 2019 Subaru Outback the RockyMounts SplitRail LS 3 Bike Platform Rack #RKY11404-3 fits without requiring a hitch adapter. If you are in need of a hitch the Draw Tite part #76227 is a confirmed fit and would…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 5

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 6

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

When determine if you can fully open swing-out doors on your 2022 ProMaster 3500 with the Yakima EXO #Y34ZR, it really depends on how far your doors swing when in the open position. While the 90-degree swing has not been tested spcificially on a 2022…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Instructions Link for Bike Add On for RockyMounts SplitRail 3 Bike Tray Style Rack

Featured Help Information

Miscellaneous Media

Continue Researching