Availability of a 5 on 4-1/2 Hub with a # LM11949 Outer Wheel Bearing
Question:
need hub 5-4 1/2 that fits a 3/4inch spline bearings LM11949 Im having trouble finding one
asked by: Mark S
0
Expert Reply:
I have found a hub for you. The Trailer Hub Assembly, # DX22XR, has a 5 on 4-1/2 bolt pattern and uses the LM11949 bearing on the outside. The inner bearing is a LM67048 and has an inside diameter of 1-1/4 inches.
This hub is rated for 2,500 lbs trailer axles and will include both bearing, races installed in hub, grease seal, dust cap and new lug nuts.
expert reply by:
Jared P
0
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- LM67048
- LM11949
- For 2500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 9 Inch Wheel
- 10 Inch Wheel
- 11 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Recommended Trailer Hub For An 8" Golf Cart Trailer Wheel
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Trailer Wiring Diagrams
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Lights on Trailer are not Working and Fuse is Blown on Curt T-Connector # C5621
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Replacement Hub for 2007 BRTR Boat Trailer ABV6217
- Q&A: Replacement Hub for a 3/4 Inch Diameter Straight Spindle
- Q&A: Recommended Replacement Hubs For 1950s Boat Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer