3,500 lb Hub Replacement Recommendation for 2001 EZ Loader Boat Trailer
Question:
I need a replacement hub assembly for my 2001 EZ Loader boat trailer. It has a 3500 lb rated axle, . Any help would be appreciated. Thanks.
asked by: Jimmy M
0
Expert Reply:
Most likely you are in need of a 3,500 lb hub and drum with a 5 on 4-1/2 inch bolt pattern like the part # AKHD-545-35-EZ-K.
If instead you need just the hub without the drum (idler hub) you would want the part # AKIHUB-545-35-EZ-K which is also designed to fit the standard 3,500 trailer axle spindle.
expert reply by:
Jameson C
0
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: etrailer Trailer Idler Hub Assembly Installation
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Article: Most Popular Wheel Bearings
- Q&A: 2005 Ranger Trail Boat Trailer Replacement Hub Bearings and Races for Oil Bath
- Video: TruRyde Electric Brake Assembly Installation
- Video: Remove and Reinstall a Trailer Hub Review
- Video: Review of TruRyde 1 Inch Diameter Trailer Spindle Castle Nut - 165686
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-35-SA Review
- Video: etrailer Trailer Bearings Races Seals Caps - Seals - 58846 Review
- Q&A: Correct Bearing Buddies for 3.5K Trailer Hub and Drum Assembly 10 Diameter 5 on 4-1/2 Pre-Greased
- Q&A: 2002 Alumaweld Boat Rogue Trailer Hubs Replacement
- Q&A: Which Bearing Buddy to Use with Trailer Hub # AKIHUB-545-35-G-EZ-K
- Q&A: What Bearing Kit do I Need for my 2007 EZ Loader Boat Trailer
- Q&A: Recommended Bearings and Hubs for 3500 lb Square Axle Trailer Spindle
- Q&A: Bearing Buddy Compatibility With 1.99 Inner Diameter Hub Assemblies.
- Search Results: dexter 3500 seals