How to Identify The Wires On 2006 Chrysler Pacifica When Installing Trailer Wiring Harness

Question

Question:

Ive purchased a hitch kit from you and a wiring harness from a local company. Im having an issue identifying the wires coming out of the tailight assembly harness. what i have requires splicing into the wires, not a harness connection. all in need is to know what color wires are what on my chryslers tailight harness. i cant seem to find this answer anywhere. No, i do not want to purchase your wiring harness, i just want to identify which wires are what. can you please help?

asked by: Jesse A

1

Helpful Expert Reply:

Since auto manufacturers can use different color wires at any time, I cannot tell you what color wires are used for your 2006 Pacifica. But I can help you out.

I recommend using a circuit tester like part # PTW2993 and test the wires on your vehicle by function. Have someone sit in the driver seat and run through the functions while you test the wires at the back of your vehicle.

Per the chart in the helpful article I have attached, the typical wire color for Chrysler vehicles is Brown for right turn and brake, Dark Green for left turn and brake, Black with a Yellow stripe, or Black for the taillights, and Black for a ground.

expert reply by: Jeffrey L

1

Answer 1

Thankfully in recent years the Mopar flat towing wiring kit you mentioned is no longer required for flat towing Jeep vehicles like the 2021 Jeep Cherokee Trailhawk. They were able to fix the need for the harness. We have the other parts needed to…

view full answer...

Answer 2

Typically, the wire colors are brown for running lights, green for right turn and brake lights, and yellow for left turn and brake lights. White is ground. To confirm this on a trailer you can trace the wires back to see where they terminate or…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 8

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 9

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

How to Identify The Wires On 2006 Chrysler Pacifica When Installing Trailer Wiring Harness

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching