bing tracking image
Q & A Icon

Where to Connect Red Wire From Brake Controller on 2001 Toyota Tundra  

Question:

WHICH WIRE ON BRAKE LIGHT SWITCH DO YOU CONNECT THE RED WIRE TO THERE ARE 4 WIRES

0

Expert Reply:

To locate the correct brake switch wire on your 2001 Toyota Tundra to connect the red wire from your trailer brake controller like the Tekonsha Prodigy P3 # 90195 to, you will need to use a circuit tester to determine the cold side of the brake switch at the brake pedal. Using a circuit tester like part # PTW2993, locate the wire that only carries a signal when the brake pedal is pressed. You will splice the red wire from your brake controller to this wire.

I have attached an article on brake controller installations that you may also find helpful.

expert reply by:
0
Chris R

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>

^

Recently Viewed Products

About Us
photos and videos
1,056,204
Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570
Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511
Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+
Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
78
Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357
Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.