What Size Wire/Synthetic Winch Rope Fits the Bulldog Winch Hook Stopper # BDW20236
Question:
It does not give the actual dimension of the hole. I am trying to use this on synthetic spydura rope which is back-braided around the thimble. The diameter just behind the thimble at the end of the line is aprox. 5/8 due to the back-braiding. Im looking for something to fit it.
asked by: Travis
0
Expert Reply:
The Bulldog Winch Hook Stopper # BDW20236 accepts the wire or synthetic rope sizes found on all Bulldog truck winches. Their most heavy duty truck winch uses a 15/32 inch diameter wire rope which is a little under 1/2 inch so up to 15/32 inch or 12mm is as large as I would go.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Bulldog Winch Cable Hook Stopper for Recovery Winches - Rubber - Black
- Accessories and Parts
- Electric Winch
- Hooks
- Hook Stopper
- Black
- Bulldog Winch
more information >
Continue Researching
- Q&A: Dimensions of the Replacement Roller Fairlead for Bulldog Winch Alpha Series Winch
- Q&A: Will the Bulldog Winch Hitch Mount with Handles Work With a Warn Electric Winch M12
- Q&A: How To Choose Correct Size Wire for 12K Winch on Rear of Vehicle
- Q&A: How Thick is the Mounting Plate on the Removeable Mounting Plate.
- Q&A: Winch Mounting Plate for 2 Hitch Receiver to Fit Warn M12000 Winch
- Q&A: Where Are Superwinch Winches Made
- Q&A: Can The ComeUp Seal Slim be Mounted Feet Down
- Article: How to Measure for Trailer Hitch Drop
- Article: The 5 Best Trailer Drop Hitches You Can Buy
Travis
5/31/2017
It does not give the actual dimension of the hole. I am trying to use this on synthetic spydura rope which is back-braided around the thimble. The diameter just behind the thimble at the end of the line is aprox. 5/8 due to the back-braiding. Im looking for something to fit it.