Replacement Hub Assemblies for Trailer with L44649 Bearings and 5 on 4-1/2 Bolt Pattern
Question:
I have a Yacht Club 2003 or 2004 dual Jet Ski trailer that I want to replace the hubs on. The certificate of origin for the trailer says the GVWR is 2050. I can only read the number on one of the bearings. Its 44649. When I place the larger part of the bearings together they all appear to be the same size. The spindle does not have a zerk fitting on it however, the hub itself does. Its located on the section of the hub where the inner bearing goes behind the tire. Unless something happens unexpectedly the trailer is only dunked in the saltwater twice a year once in and once out. I would prefer to replace the hubs with something similar that has a zerk fitting . My tires are 5.30 - 12 with 5 lugs. Thank you for any help you can provide.
asked by: Barb
Expert Reply:
Both of your bearings are # L44649 and your axle is likely rated for 2,000 pounds.
The correct hub and drum assembly for your trailer is # AKHD-545-2-2K. We don't carry any hubs that have a zerk fitting however you can use the standard hubs with a Bearing Buddy to make greasing them easier. I've linked our selection of Bearing Buddies for you.
If you don't need the brake drum and only want the idler hub use # AKIHUB-545-2-2K instead.
Products Referenced in This Question
Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44649 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Article: Trailer Wiring Diagrams
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Trailer Maintenance Schedule
- Q&A: Should the Tires Lift Off the Ground While Leveling With the Lippert Ground Control Leveling System
- Article: What Exactly is Tongue Weight?
- Q&A: Replacement Microwave for Highpoint # EC942K9
- Q&A: Replacement Microwave for my High Pointe EC942K9E in Stainless
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Q&A: Using XTRM Universal Sealant to Replace Existing Original XTRM Caulk on Roof
- Q&A: Comparing Equa-Flex and Road Armor Equalizers For 2000 Forest River WIldwood W/ 5200lb Axles
- Article: How to Rent an RV
- Article: How to Charge RV Batteries