Tools Required to Install the Reese Universal Base Rails and Installation Kit RP30035
Question:
What size drill bit for rail installation
asked by: Rose
0
Expert Reply:
The tools that are required to install the Reese Universal Base Rails and Installation Kit # RP30035 are found in the installation instructions as:
3/16" drill 3/4" Socket & Open End Wrench
17/32" drill 100 lb-ft Torque Wrench
1” drill (Some Dodge applications only)
"C" Clamps
I have attached a video of this kit being installed on a 2002 Dodge Ram for you to use as a reference.
expert reply by:
Jon G
0
Product Page this Question was Asked From
Reese Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt
- Fifth Wheel Installation Kit
- Universal
- Above the Bed
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: Can Trailer 4-Way be Ran to Trailer with 8 Wires for Trailer Wiring
- Q&A: How to Replace a 4-Way Trailer Connector with 8 Wires
- Q&A: Brake Controller and 7-Way Install on 2013 Chevy Express w/ Tow Pakage
- Q&A: How to Bleed Electric Over Hydraulic Trailer Brakes
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Can Electric Trailer Brake Kit # AKEBRK-2 be Submerged in Water
- Q&A: Difference Between Trailer Tire Sizes ST205/75R15 and ST225/75R15
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Gooseneck to 5th Wheel Adapters