How to Wire Sealed, 3-Light Truck and Trailer Identification Light Bar, # MC99RB
Question:
Can I hook this lite into the extra hole on one of my tail lights or will it cause a short. If not where do I need to hook it into? Thanks in advance.
asked by: Seth
Expert Reply:
The Sealed, 3-Light Truck and Trailer Identification Light Bar, # MC99RB, is designed to tap into the running light circuit on the trailer wiring. If you have tail lights that have an output for an auxiliary running light, it could be attached to it. Otherwise, you will need to tap into the running light wiring that runs to one of the tail lights.
Adding additional lights may cause an excessive power draw on the wiring system. This can cause the trailer lights on the trailer to not function correctly. If the towing vehicle has a powered system (the trailer lights receive most of their power from the vehicle battery) then adding these three lights will not pose a problem.
Should one of the lights become damaged or needs replaced, we carry the Mini Trailer Clearance, Side Marker Light, # MC11RB, which is a complete assembly to replace one of the 3 lights on the bar. If just the bulb burns out and needs replaced, we have Replacement Side Marker Light Bulb, # A194B.
Products Referenced in This Question
Replacement Side Marker Light Bulb # 194
- Accessories and Parts
- Trailer Lights
- Light Bulbs
- Clear
- Optronics
more information >
Optronics Mini Trailer Clearance or Side Marker Light - Incandescent - Rectangle - Red Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Rectangle
- Surface Mount
- Non-Submersible Lights
- Incandescent Light
- 3-3/16L x 1W Inch
- Red
- Optronics
more information >
Product Page this Question was Asked From
Identification Light Bar for Trucks and Trailers - Incandescent - White Steel Base - Red Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- ID Bar
- Surface Mount
- Non-Submersible Lights
- Incandescent Light
- 16-3/4L x 1-3/8W Inch
- Red
- Optronics
more information >
Continue Researching
- Shop: Mini LED Clearance or Side Marker Trailer Light - Submersible - 3 Diodes - Amber Lens
- Shop: Optronics LED Mini Clearance or Side Marker Trailer Light - Submersible - 2 Diodes - Red Lens
- Shop: Mounting Bracket for Optronics 90 Series or 91 Series Trailer Lights - Self-Grounding - Black
- Shop: Optronics Trailer Clearance and Side Marker Light - Submersible - Rectangle - Amber Lens
- Video: Optronics Lights Mounting Bracket Installation
- Search Results: optronics
- Q&A: How Can I Install Trailer Identification Lights With Little Clearance
- Shop: Tandem Axle Trailer Fender - Bolt Together - Steel - 14" to 15" Wheels - Qty 1
- Shop: Tandem Axle Trailer Fenders - Rounded Edges - Steel - 14" to 15" Wheels - Qty 2
- Video: Optronics Trailer Lights - Clearance Lights - MC11RB Review
- Video: Optronics Trailer Lights - Clearance Lights - MCL13R2B Review
- Video: Optronics Trailer Lights - Clearance Lights - MCL85AB Review
- Q&A: Do You Offer The Optronics MCL85AB With a Red Lens?
- Q&A: Replacement Trailer Clearance LED Lights with 2 3/4 Mounting Hole Spacing
- Shop: Karrier ST205/75R14 Radial Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Q&A: No Running Lights On Trailer with Two Brown Wires Wishbone Trailer Wiring Harness
- Search Results: submersible led backup light
- Search Results: submersible led backup lightaj1
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C55774 Review
- Shop: Trailer Wiring
- Q&A: Standard Color Code for Wiring Simple 4 Wire Trailer Lighting
- Q&A: How Do Utility Trailer Lights Wire Up to the Trailer Wiring Harness.
- Search Results: running lights
- Search Results: rear trailer light
- Search Results: drings
- Search Results: weld on d rings
- Q&A: Which Pin On A 7-Way Should Have Constant 12V Power When Vehicle Is Running
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams