How To Determine What Sidewinder Can Be Used To Replace Pin Box On Trailer
Question:
I have the measurements of the original pin box and need to know what turret I need to connect a sidewinder to a Reese 16k I also have questions about the rails and mounting bracket for 2014 F-150 STX crew cab 5.5 box also need to know what sidewinder to get
asked by: Jeremy
Expert Reply:
The easiest way to find the right Sidewinder pin box is to get the make and model of the pin box currently on your fifth wheel trailer. If you do not know the make and model, you can use the chart in the attached article to find the right Sidewinder for your trailer, or you can give me the measurements you said you have and I will be glad to make a recommendation that will work for you.
The 16,000-lb fifth wheel hitch we offer that will work with a Sidewinder in your 2014 F-150 with the short bed is the Reese # RP30047.
The installation kit I recommend is the custom kit # RP50081-58. The brackets attach easily to the outboard side of your truck frame. You only need to drill 8 holes in the truck bed for the installation of the rail kit. I have attached a link to an installation video for this kit you can check out.
If you need a 7-way wire harness in the bed of your truck I recommend part # 50-97-410.
Products Referenced in This Question
5th Wheel/Gooseneck 90-Degree Wiring Harness w/ 7-Pole Plug - GM, Ford, Ram, Toyota - 9' Long
- Custom Fit Vehicle Wiring
- Fifth Wheel and Gooseneck Wiring
- 9 Feet Long
- Custom Fit
- 7 Round - Blade
- Bargman
more information >
Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches
- Fifth Wheel Installation Kit
- Custom
- Above the Bed
- Reese
more information >
Product Page this Question was Asked From
Reese 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs
- Fifth Wheel Hitch
- Fixed Fifth Wheel
- Aftermarket Below Bed Rails
- 4000 lbs Vertical Load
- 16000 lbs GTW
- Double Pivot
- Standard - Double Jaw
- 13-1/2 - 17 Inch Tall
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Do all Fifth Wheel Rails have the Same Dimensions
- Article: Sidewinder with Rotating Turret for Short Bed Pickups
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: How Much Upward Bend Should Trailer Axle Have
- Q&A: Replacement Disc Brake Caliper for a Tie Down Engineering 46304 Caliper
- Q&A: Replacement For Dexter DX12.5 Brake Actuator on Boat Trailer
- Q&A: Which Lift Kit Fits 2010 Forest River R-Pod 172 with Lippert 3,500 Torsion Axle
- Article: Ram Trailer Tow Prep Package
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Can I Use A Curt A20 With A Reese Sidewinder On A Ram Truck With The Rambox
- Q&A: How Far Back Should Thule Mounting Feet Be Placed On a 2019 Toyota Highlander with Bare Roof
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Gooseneck to 5th Wheel Adapters
- Article: 5th Wheel Hitch Installation | The Ultimate DIY Guide