Why Is Reese Revolution Pin Box Not Compatible With B&W Companion Slider?
Question:
I just installed a turnover ball plate and a Companion Slider in my 2015 F150 S/Cab 6 1/2 ft box. Purchased a 2013 Rockwood Signature Ultra Lite that has a Reece Revolution pin box. I pulled it home 220 miles, worked great, now I read that the Revolution/Companion are not compatible. Help, please!
asked by: Dana T
Helpful Expert Reply:
On your 2015 Ford F-150 6.5 foot bed, the Custom Underbed Installation Kit # BW77FR and the B&W Companion 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 20,000 lbs # BWRVK3400-5W make an excellent system. Unfortunately, like you mentioned it is not compatible with a Revolution pin box or the aftermarket Sidewinder.
The reason for the incompatibility is the Revolution pin box uses the rotating turret that changes the rotation point from the king pin back 22 inches in most cases. This change of location puts too much torque on the underbed gooseneck hitch and can damage the assembly. So at this point, you have a couple options. You can lock out the Revolution pin box and use your current system, or you can change out your hitch for one that uses a different rail system and you can even use a standard hitch versus a slider since you have a Revolution pin box.
![Jason S](https://images.etrailer.com/static/images/catg/people/1044_tn.jpg)
Products Referenced in This Question
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Gooseneck Hitch
- Below the Bed
- Manual Ball Removal
- 7500 lbs TW
- 30000 lbs GTW
- Removable Ball - Stores in Hitch
- Wheel Well Release
- 2-5/16 Hitch Ball
- B and W
more information >
Product Page this Question was Asked From
B&W Companion 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 20,000 lbs
- Fifth Wheel Hitch
- Sliding Fifth Wheel
- Aftermarket Below Bed Rails
- 5000 lbs Vertical Load
- 20000 lbs GTW
- Double Pivot
- Standard - Double Jaw
- 17 - 19 Inch Tall
- 12 Inch Fore/Aft Travel
- B and W
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Article: Gooseneck to 5th Wheel Adapters
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Is Bow in 3,500 lb Trailer Axle Enough Camber for Loaded and Unloaded Trailers
- Q&A: How Much Upward Bend Should Trailer Axle Have
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: What Should Tire Pressure be for a Load Range G 110 psi Tire
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Trailer Hitch for a 2015 Honda Pilot
- Q&A: Why Is 5th Wheel Trailer Clunking When Starting/Stopping with B&W Companion and MORryde Pin Box
- Article: Trailer Wiring Diagrams
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited