Can the Trailer Valet XL Be Used on a Trailer With a Surge Brake Actuator
Question:
Can I use a trailer valet xl on my camper with surge brakes? If I disengage them does that coupler still move on me so the trailer valet wont stay vertical. Any help on this would be appreciated.
asked by: Jon V
Expert Reply:
You shouldn't have any problems with the Trailer Valet not staying vertical. If you have a surge brake actuator, like the Dexter DX7.5 Drop-N-Go Brake Actuator # 099-175-00 that doesn't have a reverse lockout, then the only problem that you will have is when you try to back the trailer up the brakes will engage. If you disengage the brakes then the Trailer Valet will work as it is intended to. Just be sure to re-engage the brakes when you are done moving your trailer.
You can use either the Trailer Valet XL # TVXL2 with a 2 inch hitch ball, or the Trailer Valet XL # TVXL25 with a 2-5/16 inch hitch ball if you have a larger compatible actuator. If you would like to interchange the hitch balls you can purchase either Valet along with the 2 inch # TVBB2 or 2-5/16 inch # TVBB25 replacement hitch ball.
Products Referenced in This Question
Dexter DX7.5 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- Drum Brakes
- No Lockout
- Dexter
more information >
2" Hitch Ball w/ Base for Trailer Valet XL Trailer Dolly - 1,000 lbs
- Accessories and Parts
- Trailer Dolly
- Trailer Dolly Parts
- Hitch Ball
- 2 Inch Ball
- Trailer Valet
more information >
2-5/16" Hitch Ball w/ Base for Trailer Valet XL Trailer Dolly - 1,000 lbs
- Accessories and Parts
- Trailer Dolly
- Trailer Dolly Parts
- Hitch Ball
- 2-5/16 Inch Ball
- Trailer Valet
more information >
Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball - 10,000 lbs
- Trailer Dolly
- Manual Dolly
- 10000 lbs Capacity
- 19 Inch Tall
- 20 Inch Tall
- Steel
- 2-5/16 Inch Ball
- Black
- Trailer Valet
more information >
Product Page this Question was Asked From
Trailer Valet XL Trailer Dolly with Chain Drive - 2" Hitch Ball - 10,000 lbs
- Trailer Dolly
- Manual Dolly
- 10000 lbs Capacity
- 19 Inch Tall
- 20 Inch Tall
- Steel
- 2 Inch Ball
- Black
- Trailer Valet
more information >
Continue Researching
- Shop: Replacement 2" Hitch Ball for Trailer Valet XL Trailer Dolly - 1,000 lbs
- Shop: Saris Cycle Glide Bike Storage System - Ceiling Mount - 6 Bikes
- Q&A: How to Wire a 6 Pole Round Trailer End Plug
- Q&A: How to Measure Hub Face of Mobile Home Hub and Drum
- Article: Trailer Wiring Diagrams
- Q&A: Where Is Factory Trailer Brake Controller Port On 2021 Chevrolet Tahoe W/ Factory Tow Package?
- Q&A: Where is the Factory Trailer Brake Controller Port On a 2022 Chevrolet Tahoe
- Q&A: Trouble Finding the Brake Controller Wiring Port on a 2019 Chevy Blazer
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Seal With Dimensions to Replace 171255UC
- Article: How Long Can You Boondock in an RV?
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Stability Control for Heavy Duty Vehicles
- Article: Gooseneck Trailer Hitch Information and Review
- Article: How to Measure for Trailer Hitch Drop
- Article: Enjoy The 2024 Eclipse With Harvest Hosts