Are the Brackets of the Valterra EZ Hose Carrier # A04-5094BK Adjustable

Question

Question:

are the mounting brackets adjustable. the pipe is 94 inches, but can the brackets be set at 72 inches

asked by: Johnny

0

Expert Reply:

The brackets of the Valterra EZ Hose Carrier # A04-5094BK that you referenced are built into the end caps of the carrier so they are not adjustable.

expert reply by: Jameson C

0

Answer 1

No, the elbow won't fit but if you take it off the EZ Coupler RV Sewer Hoses w/ Swivel Lug Fittings item #D04-0115 will fit inside the Valterra RV Sewer Hose Carrier item #A04-5094BK. The fittings measure right at 4-3/16" so you'll have…

view full answer...

Answer 2

In regards to the Valterra RV Sewer Hose Carrier #A04-5094BK there are multiple mounting locations, such as the frame, the tongue, or the bumper. Also this unit is adjustable from 50 inches to 94 inches. It's able to adapt to the best mounting…

view full answer...

Answer 3

The brackets of the Valterra Adjustable RV Hose Carrier - 50" to 94" - Black #A04-5094BK are 5 1/4 inches center on center, so yes it is wider than the 4 x4 inch bumper. I recommend the CE Smith Frame Strap - 5-1/4" Hole to Hole Length…

view full answer...

Answer 4

We do offer sewer hose carriers for hose lengths from 26 to 94 inches. These would usually mount under the coach, but they can be mounted on the top of the bumper or wherever else space is available. We don't offer anything with a square door or…

view full answer...

Answer 5

The Valterra RV Sewer Hose Carrier #A04-5094BK has the potential to be a no-drill installation. The install location would need to have the holes in the right places already to avoid having to drill any new holes. On the mounting brackets the holes…

view full answer...

Answer 6

The Replacement Cap for EZ Coupler 4-in-1 RV Sewer Adapter with 90-Degree Elbow Fitting part #F02-3107 is designed to be used with the 90 degree clear plastic adapter that comes with the EZ Coupler RV Sewer Hose Kit part #D04-0115.

view full answer...

Answer 7

There is Schedule 20 and 40 sewer pipe that has an outer diameter of 3-1/2 inches like what the Valterra Rotating Adapter for Rigid RV Sewer Pipe #T1028 is designed to work with so yes it would fit if the size was correct.

view full answer...

Answer 8

I went out to the warehouse to measure the overall depth of the Valterra Twist-On Waster Valve, #T58, for you. It has an overall depth of 5-1/16 inches. I have included a picture showing this for you.

view full answer...

Answer 9

While we have an option for you, both of the hoses from the EZ Coupler RV Sewer Hose Kit - (2) 10' Long Hoses #D04-0115 will be 50 inches when collapsed, which is too long for your 4 foot bumper. You can use one of the 10 foot hoses, the EZ…

view full answer...

Answer 10

The internal diameter of the Valterra part #A04-5094 is 4-3/8 inches. The hose part #D04-0115 that you mentioned has an outer diameter of 3 inches.

view full answer...

Answer 11

I measured the fittings on the EZ Coupler RV Sewer Hose Kit #D04-0115 for you. On either end the overall diameter at the widest point is 4.15 to 4.16 inches. That is a hair under 4-3/16 inches.

view full answer...

Answer 12

We don't sell the 4x4 inch steel bumper, we do however sell the sewer hoses that often can be stored within them like the EZ Coupler RV Sewer Hose Kit w/ Swivel Fittings and 4-in-1 Clear Adapter - (2) 10' Long Hoses #D04-0115. If you…

view full answer...

Are the Brackets of the Valterra EZ Hose Carrier # A04-5094BK Adjustable

Product Page this Question was Asked From

Continue Researching