Recommended Slipper Spring Suspension for 10,000 Pound Trailer

Question:

Hi , I have a trailer with axles that are 3in diameter. The rims we will be using are 16s with 8 holes and I plan on using this tire size 235/85 16. . Our max wieght loaded would not be more than 10,000lbs, but you have no hydralic brake actuators for that weight, so I plan on purchasing the 12,500lb hydraulic brake actuator you sell. Given these specs I need you to tell me what spring leaf slippers, equalizers and hanger kit to buy. I really need your expertise on the suspension by the way the chassis is made of 4x4inch structual steel 1/4inch thick walls, I would also appreciate instructions as to placement for proper weight distribution. If you dont have this info thats ok just point me in the right direction please.

asked by: Olga O

Helpful Expert Reply:

For Slipper Springs to install on your trailer that will have a maximum load of around 10,000 pounds, I recommend either the 5-Leaf Slipper Spring w/ Hook End for 6,000 pound Axles # e67SR or the 4-Leaf Slipper Spring for 5,000 Pound Axles # SP-231275, depending on the actual axle capacity for your trailer.

Then for a hanger kit, which will work for either of the Slipper Springs mentioned above, I recommend the Tandem-Axle Trailer Hanger Kit for 2 Inch Slipper Springs # AP216-H202. This kit includes the hangers, equalizers and shackle bolts needed. Note that this is designed for tandem-axle trailers, which I assume is what your trailer has, however if it is not, please let me know and I will be happy to give you additional options.

Lastly, you will need a U-Bolt Kit like the Redline # APUBR-8. This kit is designed for 3 inch axles and you will need one kit for each axle on your trailer.

I have attached a really nice image that will help you determine the proper axle placement on your trailer. I have also included an article on Slipper Spring Suspension that you may find helpful.