Availability of Phoenix Wheel Cover part # QT655L

Question

Question:

I need a Phoenix wheel cover QT655L. Can you help me?

asked by: Mark W

0

Expert Reply:

Sounds like you are looking for our part number # QT6556CLO. This is a Phoenix USA QuickTrim Ring Cover for 16" Trailer Wheels with a bolt pattern of 6 on 5-1/2

expert reply by: Jameson C

0

Answer 1

I have just the hub cover for you. Check out part #QT6556CLO. This cover fits a 6 on 5/1/2 bolt pattern and a 16 inch wheel. The cover is ABS Chrome construction with an easy snap-on installation.

view full answer...

Answer 2

We've only had good feedback about how well the Phoenix USA QuickTrim Ring Cover for 16" Trailer Wheels #QT6556CLO fits to a wheel. They have flexible metal tabs like a standard hub cap that hold them very securely to the wheel. As long as…

view full answer...

Answer 3

To keep the batteries on your Forest River Cedar Creek Hathaway Edition 36CK2 charged and maintained while your RV is in storage I recommend using the Go Power Eco Solar Charging System #34273836. This kit includes a single solar panel, fuse…

view full answer...

Answer 4

You can use the Go Power Eco Solar Charging System with Digital Solar Controller - 10 Watt Solar Panel #34273836 if you use the battery for any other electronics on the trailer. This will provide 3.42 amp hours of charging power and will allow you to…

view full answer...

Answer 5

The Go Power Eco Solar Charging System - 10 Watt Solar Panel #34273836 is designed to be mounted to the roof so it has the best opportunity to collect sunlight and with it being mounted to the roof it's a one time install instead of having to…

view full answer...

Answer 6

I spoke with my contact at Go Power and he said that under good sun conditions and with limited to no power draw, the 10 Watt Solar Panel Charging System #34273836 that you referenced should be enough to provide a sufficient trickle charge to your 2…

view full answer...

Answer 7

Another wire or harness is not needed on the 2023 Honda CR-V for the install of the Curt 4-Way Wiring Harness #C56370, but you do have to add 20 amp fuse to location #17 in the fuse box.

view full answer...

Answer 8

There typically aren't any part numbers stamped onto the trailer spindle that can be used for identification. There are however numbers stamped onto the hub most times which can be used for identification. The TDE46210 tells me you have a 3,500…

view full answer...

Answer 9

We have electric drum brakes rated for 4400-lb axles (and hydraulic drum brakes rated for 3750- and 5200-lb axles) but none rated for exactly 4000-lbs. For electric drum brakes in the 10 x 2-1/4-inch size for a 5th wheel the 4400-lb-rated brakes will…

view full answer...

Answer 10

What's the diameter of the shaft where your current springs are installed? If they are 1-1/2 inches you could install the part #RS16933LH and #RS16933RH instead of what you have now and you'd have a much more powerful spring. But if the shaft…

view full answer...

Answer 11

Because the 8-14.5 tire that you've got sits on a 14.5" wheel, so you wouldn't be able to switch tire sizes with anything that we have available without also switching to a new wheel as well. If you've got a 6 on 5-1/2" bolt…

view full answer...

Answer 12

These are the same assemblies just different part numbers. Our part #84546UC3-EZ is the same as the Dexter part number K08-247-94 you mentioned. These are Dexter assemblies they have just changed their part number. I've attached a review video as…

view full answer...

Availability of Phoenix Wheel Cover part # QT655L

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching