Replacement Cover For 2010 GMC Sierra 1500 With 6.5 Foot Bed

Question

Question:

I wanted to know which replacement tarp will fit the rail system on a 2010 GMC Sierra 1500 with a 6.5 bed, the original part number is 14650.

asked by: Travis

0

Expert Reply:

The replacement cover for your Extang Tuff Tonno Soft Tonneau Cover - Snapless J-Strip - Roll Up - Vinyl # EX14650 on your 2010 GMC Sierra 1500 is # EX13650. I contacted the manufacturer to confirm this fit for you.

expert reply by: Jason S

0

Answer 1

When it comes to a replacement tarp for the Extang Tuff Tonno Soft Tonneau Cover, #EX14660, on your 2007 Chevrolet Colorado, you will need part #EX13660.

view full answer...

Answer 2

It seems like you have the Extang Tuff-Tonneau #EX14650. This is the correct replacement cover for your 2019 Chevrolet Silverado 6.5ft bed #EX13650.

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 8

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 9

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 10

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 11

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 12

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Replacement Cover For 2010 GMC Sierra 1500 With 6.5 Foot Bed

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching