Replacement Lens for RV Puck Light

Question

Question:

Does this fit replacement for 2008 fleetwood revolution interior puck light?

asked by: Rich W

0

Expert Reply:

The lens # 277-000393 is the replacement for Gustafson RV Puck Light # 277-000343 and # 277-000342.

I can't tell you if this is the type of light you have because RV manufacturers rarely document the specific parts that are used. If you can find a model number on the light itself it might be helpful.

expert reply by: Charles S

0

Answer 1

I have a solution for you, but it doesn't appear that we have that exact replacement lens or light. With that being said, I think I can get you close with the Replacement light #277-000344. If that doesn't match your lights one other option…

view full answer...

Answer 2

A replacement lens is not something that can be acquired for the 5" Gustafson RV Puck Light #277-000341. If the lens is broken you will need to replace the entire light fixture.

view full answer...

Answer 3

I took a look at what we have, and the closest I was able to get to your 8-1/2" x 3-1/2" lens is the: -Replacement Clear Lens for Gustafson RV Porch Light #291-000002. This lens is clear in color like you mentioned, and measures 8-3/4"…

view full answer...

Answer 4

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 5

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 6

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 7

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 8

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

A 16 inch tire will not fit on a 16.5 inch wheel. You would either need to get new 16 inch wheels with the proper bolt pattern to match what the hubs require or to get your existing wheels you would need to go with 16.5 inch tires. You mentioned you…

view full answer...

Answer 11

The temperature light on your Everchill RV Refrigerator w/ Freezer #324-000119 is likely flashing because of a lack of full power to the fridge. The fridge requires 11 amps. It is likely trying to use more power than what is available which is why…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Replacement Lens for RV Puck Light

Products Referenced in This Question

Featured Help Information

Miscellaneous Media

Continue Researching