Can Kenda Loadstar Bias Trailer Tire/Wheel Combo Fit Hiway Master Motorcycle Trailer
Question:
hi there, i have a hi way master 4.8x12 on a 5 bolt pattern tire on a motorcycle trailer. im looking to replace it with the kenda 4.8x12 on aluminum wheel. is this an exact fit? if not, what is the return policy? im concerned because ive gone over all the measurements and space is tight in the wheel well. thanks,
asked by: David
Expert Reply:
The tire that is on the # AM30670 combo is the same size as you said you have on your Hiway Master motorcycle trailer. This is a Load Range C combo, and it has a maximum load capacity of 990-lbs at 90 psi. This combo has a 3.19-inch diameter pilot hole.
The wheel bolt pattern for the # AM30670 is 5 on 4-1/2. To make sure it will be a good fit you can check out the attached helpful article that explains how to measure the wheel bolt pattern on your existing hubs.
Product Page this Question was Asked From
Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 4.80-12
- 12 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Boat Trailer Wheels
- Kenda
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: Max Highway Speed Rating for 4.80-12 Tires
- Q&A: Correct Replacement Tire and Wheel for 2021 Triton PWC Trailer
- Q&A: How Much PSI Should I Put In a 4.80 x 12 Trailer Tire
- Article: Trailer Wiring Diagrams
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Which Trailer Tire Size is best for a Jet Ski Trailer that has 4.80-12 Tires
- Q&A: Highest Speed Rating for a 4.80 x 12 Trailer Tire
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure a Trailer Axle
- Article: Measuring a Trailer Tire