Recommended Anti-Sway Bar for Fleetwood RV with 2017 Ford E450 Chassis

Question

Question:

I am looking for anti-sway bars for my 2017 Fleetwood Jamboree Class C. It is on a Ford E450 chassis with the V10.

asked by: Michael H

0

Expert Reply:

For an anti-sway bar that will fit the Ford E450 chassis of your 2017 Fleetwood Jamboree RV, I recommend the Roadmaster Rear Anti-Sway Bar # RM-1139-147. This will mount to the rear axle of the Ford chassis to minimize sway and improve the stability of your vehicle. The system uses the weight of the axle to brace the frame as it shifts in turns. The heavy-gauge mounting hardware is included and I have attached the installation details for your review.

For a front sway bar, I recommend the Roadmaster # RM-1139-176 which is confirmed to fit the 2017 E450 chassis. I have attached video demonstrations of both of these anti-sway bars for you to check out.

expert reply by: Chris R

0

Answer 1

Yes, an upgraded anti-sway bar would absolutely help to improve the overall handling of your 2017 Thor M-25.4. This is actually one of the most popular upgrades for motorhomes because of the same feeling that you described. It would be best if you…

view full answer...

Answer 2

For your 2017 Thor Axis Class A Motorhome, I recommend adding front and rear anti-sway bars to help control your coach. The Roadmaster Front Anti-Sway Bar, #RM-1139-176, and Rear Anti-Sway Bar, #RM-1139-147, will help reduce sway to improve overall…

view full answer...

Answer 3

I have attached for you below a list of suspension components that will improve the ride, handling, steering, and overall stability of your 2022 Thor Axis 25.6 on Ford E-450 Chassis. If you don't want to do everything at once, I have attached…

view full answer...

Answer 4

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 5

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the breakaway…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 10

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Recommended Anti-Sway Bar for Fleetwood RV with 2017 Ford E450 Chassis

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching