Should Trailer Tire Be Inflated To Maximum Air Pressure Listed On Sidewall Of Tire
Question:
has a ply rating of 8 and a 1,330-lb maximum load at 70 psi. The 10inch diameter x 6inch wide steel trailer wheel features a 4 on 4 bolt pattern and a corrosion-resistant powder coat finish. end quote, does this mean the tire should run 70 psi
asked by: Tim
Expert Reply:
You are correct. The tire that is included with the Kenda Tire/Wheel Combo, part # AM3H410 should be inflated to 70 psi. At the maximum air pressure, the tires will perform and wear best, and get the best gas mileage.
If a trailer tire is inflated to a lower air pressure than the maximum, the amount of weight that the tire can carry will be reduced. If a heavier load is put on the trailer tire than what is recommended for that air pressure, the sidewall of the tire could heat up and cause the tire to fail. You should always inflate your tires when they are cold.
If a tire is over-inflated, it will wear more in the center of the tread, all the way around the tire. If a tire is under-inflated, it will wear on the outside edges of the tread, all the way around the tire.
Product Page this Question was Asked From
Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 4 on 4 - Load Range D
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range D
- 205/65-10
- 10 Inch
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 4 on 4 - Load Range D
- Video: Kenda Tires and Wheels - Tire with Wheel - AM3H410 Review
- Video: Review of Kenda Tires and Wheels - Tire with Wheel - AM3H470
- Video: CE Smith Spare Tire Carrier Padlock Brackets Review
- Video: Dexter Electric Brake Assembly Review
- Video: CE Smith Spare Tire Carrier for Trailers Review
- Search Results: 20.5x8.0~10
- Search Results: spare tire bracket
- Search Results: carlisle
- Search Results: 20.5x8x10
- Search Results: fstc1000301
- Search Results: electric brake replacement
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 4 on 4 - Load Range B
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 4 on 4 - Load Range C
- Shop: etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Q&A: Can 7 x 1-1/4 Inch Electric Brakes be Used with Drums for 7 x 1-3/4 Hydraulic Brakes
- Shop: Brake Mounting Flange for 2-3/8" Round Axle
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 4 on 4 - Load Range B
- Shop: Steel Trailer Wheel - 10" x 6" Rim - 5 on 4-1/2 - White
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30153 Review
- Q&A: Is Kenda 205/65-10 Bias Trailer Tire with Wheel # AM3H460 Balanced
- Q&A: Is Trailer Tire and Wheel Size 20.5 x 8 x 10 Fine for Highway Use
- Q&A: Inner Dimensions of the CE Smith Spare Tire Carrier part # CE22007Z-11050-2
- Q&A: Trailer Tire Recommendation to Upgrade From 215/60-8 Tires
- Q&A: Upgrading the Tire and Wheel on a Harbor Freight Trailer
- Q&A: Spare Tire Carrier for an 8 Inch Trailer Tire with 4 Bolt Pattern
- Video: Optronics LED Trailer Tail Lights with Grommet and Pigtails Review
- Search Results: spare tire hanger